Spermann SDAH 5.0-CS 9.05
Built: 2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Spermann – other models: the collective page of trailers and semi-trailers outside the named ranges, from 1.9 to 11.5 t unladen weight, 5 to 29 t gross weight
This page gathers the trailers and semi-trailers of the Spermann brand that the register could not assign to a named range. The model names SAL 29-13,5 ES, SAL 5.2-CS7.25E, SDAH 5.0-CS 9.05 and SKO 5.5/L6.0 show a programme made up of several range codes across different size classes. The trailers in the programme range from single-axle to multi-axle versions, depending on the size class.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 1,940 to 11,500 kg and gross weights from 5,000 to 29,000 kg. Lengths from 7,100 to 14,050 mm and widths from 2,200 to 2,600 mm are recorded.
The span from just under 2 to nearly 12 tonnes unladen weight shows a programme reaching from medium to heavy trailers, covering different haulage tasks in road freight transport. Such a broad programme lets hauliers choose, depending on the job, between lighter and heavier trailers from the same maker.
Buying used, check for rust on the frame and chassis rails, the condition of axles, brakes and the overrun brake device, the tightness of the body and tarpaulin, and tyres and lighting; on the larger semi-trailers also the condition of the fifth-wheel coupling and landing legs. Parts for axles, brakes and couplings run through the general commercial-trailer parts trade. A service book and inspection history give additional insight into maintenance condition and accident-free use.
Sources: SpecCodex register, model data: Spermann (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,390 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,950 mmcorrect |
| Unladen weight | 2,960 kgcorrect |
| Gross vehicle weight | 5,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Spermann SDAH 5.0-CS 9.05 weigh?
The unladen weight is 2,960 kg.
What is the gross vehicle weight of the Spermann SDAH 5.0-CS 9.05?
5,000 kg.
Up to what speed is the Spermann SDAH 5.0-CS 9.05 approved?
Approved up to 100 km/h.
What are the dimensions of the Spermann SDAH 5.0-CS 9.05?
11,390 mm × 2,550 mm.
When was the Spermann SDAH 5.0-CS 9.05 built?
Production years: 2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
