Siemens 1LE1501-1EB4 – specifications
Series: 1LE1
The 1LE1501-1EB4 from Siemens is a three-phase induction motor. The rated output is 22 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 180 L in foot-mounted form. The protection class is IP45 and IP55. The efficiency is 91.7 per cent at full load, 92.3 per cent at 75 per cent load and 92 per cent at half load. The motor weighs 170 kg. At full load it delivers 143 Nm. Stated countries of manufacture: Czechia and Germany. The figures come from the Australian MEPS register under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1LE1501-1EB4 sits at the bottom of that range with 22 kW. Its immediate neighbours are the 7.6729.0 below it with 18.5 kW and the 1LA9189-2XA96 above it with 25 kW. 569 Siemens models across 4 series are on record.
Build year not documented · Data origin: Official register · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Siemens – 1LE1 series at a glance
The 1LE1 series from Siemens comprises 28 models in the register, in the Electric motors group. Rated power ranges from 2 to 55 kW. Listed in the register: 1LE1, 1LE1001-1BA2, 1LE1001-1BC2, 1LE1001-1DB2.
Sources: SpecCodex-Register (eigene Daten)
Technical data
Engine
| Rated output | 22 kWcorrect |
|---|
Dimensions and weights
| Weight | 170 kgcorrect |
|---|
Electrical data
| Number of poles | 4correct |
|---|---|
| Protection class | IP45, IP55correct |
| Frame size | 180 L (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B6, B7, B8, B9, B10, B14, B15, B20, B25, B34, B34, B35, V1, V2, V3, V4, V5, V6, V8, V9, V10, V14, V15, V16, V18, V19, V30, V31, V36correct |
| Efficiency at full load | 91.74 %correct |
| Efficiency at 75 % load | 92.31 %correct |
| Efficiency at half load | 91.99 %correct |
Origin and approval
| Country of manufacture | Czechia, Germanycorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1LE1
1LE1001-1BA2
1LE1001-1BC2
1LE1001-1DB2
1LE1001-1DB4
1LE1003-1CA03-4AB4-Z
1LE1003-1CB01/AV3130B
1LE1003-1DA33-4AB4-Z
1LE10031BA
1LE10031BA234AB4-Z
1LE10031BB
1LE10031BB234AB4-Z
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · Data sources and cross-checks
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.