Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Siemens › 1LE1 › 1LE1001-1DB4

Siemens 1LE1001-1DB4

Series: 1LE1

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Siemens 1LE1001-1DB4 is a three-phase induction motor from the Siemens range. The rated output is 15 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 160 L in foot-mounted form. The protection class is IP55. The efficiency is 91.3 per cent at full load, 91.2 per cent at 75 per cent load and 91.1 per cent at half load. The motor weighs 104 kg. At full load it delivers 97 Nm. Stated countries of manufacture: Czechia and Germany. The figures come from the Australian MEPS register under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1LE1001-1DB4 sits at the bottom of that range with 15 kW. Its immediate neighbours are the 1AV2167B below it with 13.8 kW and the 1AV2204B above it with 18.2 kW. 569 Siemens models across 4 series are on record.

Siemens – 1LE1 series at a glance

The 1LE1 series from Siemens comprises 28 models in the register, in the Electric motors group. Rated power ranges from 2 to 55 kW. Listed in the register: 1LE1, 1LE1001-1BA2, 1LE1001-1BC2, 1LE1001-1DB2.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Rated output15 kWcorrect

Dimensions and weights

Weight104 kgcorrect

Electrical data

Number of poles4correct
Protection classIP55correct
Frame size160 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B9, B10, B14, B15, B20, B25, B34, B34, B35, V1, V2, V3, V4, V5, V6, V8, V9, V10, V14, V15, V16, V18, V19, V30, V31, V36correct
Efficiency at full load91.26 %correct
Efficiency at 75 % load91.2 %correct
Efficiency at half load91.06 %correct

Origin and approval

Country of manufactureCzechia, Germanycorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Siemens 1LE1001-1DB4 have?

The Siemens 1LE1001-1DB4 delivers 15 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare