Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Schilling › Hans

Schilling Hans

Built: 1947–1950 · Series: Other models

More machines from model year 1947

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pozostałe modele series from Schilling includes the Hans. Production: 1947–1950. The engine delivers 4 hp (2.9 kW), has 1 cylinder, with a displacement of 171 cm³. Rated speed is 3,000 rpm. Top speed is 6 km/h. Transmission: 2V. The engine is air-cooled. The fuel is petrol. The fuel is petrol. Rated output within this group ranges from 2 to 760 hp; the Hans sits at the bottom of that range with 4 hp. Its immediate neighbours are the HM 3 below it with 3.5 hp and the AM 1 above it with 4.5 hp. Rated output within this group ranges from 1.9 to 559 kW; here the Hans sits at the bottom of that range with 2.9 kW.

Schilling – other models: the collective page with Franz and Hans, small single-cylinder engines of 171 to 247 cm³, 2.9 to 6 kW at 3,000 revolutions per minute, fuel petrol and two-stroke mixture

This page gathers the Schilling machines the register could not assign to a named range: Franz and Hans, two small single-cylinder engines. With outputs of only 2.9 to 6 kW and displacements of 171 to 247 cm³, both models sit well below the class of classic farm tractors and correspond more to motorised small equipment for gardens or smallholdings.

Read on 3 more paragraphs

The register lists here 2 versions with 2.9 to 6 kW from a single cylinder of 171 to 247 cm³ at 3,000 revolutions per minute. The fuel is pure petrol on Hans and a two-stroke mixture of petrol and oil on Franz.

Engines of this power and displacement class were used in the first half of the 20th century chiefly in the smallest tractors, motor hoes and similar hand-guided or single-axle implements, with which smaller plots could be worked without needing a full-size, heavier farm tractor.

On such a small machine, the condition and compression of the single cylinder, the state of the carburettor and ignition, on Franz also the correct mixture ratio of the two-stroke fuel, and the condition of the drive belt or chain and corrosion on the sheet-metal body matter most; parts for such small engines of this age can usually only be sourced through collectors and specialists.

Sources: SpecCodex register, model data: Schilling (weitere Modelle)

Technical data

Engine

Fuelpetrolcorrect
Fuelpetrolcorrect
Power4 hp (2.9 kW)correct
Rated speed3,000 rpmcorrect
Rated speed3.000/mincorrect
Cylinders1correct
Cylinders1 Hubraumcorrect
Displacement171 cm³correct
Coolingair-cooledcorrect
Cooling systemLuftcorrect

Drivetrain and chassis

Drivesingle-axle drivecorrect
Gearbox2Vcorrect
Top speed6 km/hcorrect
Drive typeEinachsercorrect

Origin and approval

Production period1,947correct

Other data

Rated engine output2, 9 /correct
Werke nürnberg typGEMOcorrect
Zweitakt-ottomotor herstellerTriumphcorrect

Frequently asked questions

How much power does the Schilling Hans have?

The Schilling Hans delivers 2.9 kW.

What engine does the Schilling Hans have?

1 cylinders, 171 cm³ displacement, Benzin.

How fast does the Schilling Hans go?

Top speed is 6 km/h.

When was the Schilling Hans built?

Production years: 1947–1950.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare