Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Schilling › Other models › Franz

Schilling Franz

Built: 1949–1952 · Series: Other models

More machines from model year 1949

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Franz from Schilling is part of the Pozostałe modele series. Production: 1949–1952. The engine delivers 6 hp (6 kW), has 1 cylinder, with a displacement of 247 cm³. Top speed is 15 km/h. The engine is air-cooled. The fuel is 2. The fuel is 2-Takt Gemisch / Benzin. Rated output within this group ranges from 2 to 760 hp; the Franz sits at the bottom of that range with 6 hp. Its immediate neighbours are the Universal below it with 5 hp and the 6000 above it with 6.4 hp.

Schilling – other models: the collective page with Franz and Hans, small single-cylinder engines of 171 to 247 cm³, 2.9 to 6 kW at 3,000 revolutions per minute, fuel petrol and two-stroke mixture

This page gathers the Schilling machines the register could not assign to a named range: Franz and Hans, two small single-cylinder engines. With outputs of only 2.9 to 6 kW and displacements of 171 to 247 cm³, both models sit well below the class of classic farm tractors and correspond more to motorised small equipment for gardens or smallholdings.

Read on 3 more paragraphs

The register lists here 2 versions with 2.9 to 6 kW from a single cylinder of 171 to 247 cm³ at 3,000 revolutions per minute. The fuel is pure petrol on Hans and a two-stroke mixture of petrol and oil on Franz.

Engines of this power and displacement class were used in the first half of the 20th century chiefly in the smallest tractors, motor hoes and similar hand-guided or single-axle implements, with which smaller plots could be worked without needing a full-size, heavier farm tractor.

On such a small machine, the condition and compression of the single cylinder, the state of the carburettor and ignition, on Franz also the correct mixture ratio of the two-stroke fuel, and the condition of the drive belt or chain and corrosion on the sheet-metal body matter most; parts for such small engines of this age can usually only be sourced through collectors and specialists.

Sources: SpecCodex register, model data: Schilling (weitere Modelle)

Technical data

Engine

Fuel2correct
Fuel2-Takt Gemisch / Benzincorrect
Power6 hp (6 kW)correct
Cylinders1correct
Displacement247 cm³correct
Displacement247/correct
Stroke70 /correct
Coolingair-cooledcorrect

Drivetrain and chassis

Drivesingle-axle drivecorrect
Gearbox2 Gang-Wendegetriebecorrect
Top speed15 km/hcorrect
Drive typeEinachsercorrect

Origin and approval

Production period1,949correct

Other data

Benzin kühlsystemLuftcorrect
Franz basisdaten hersteller/markeSchillingcorrect
Leistung6, 5 PScorrect

Frequently asked questions

How much power does the Schilling Franz have?

The Schilling Franz delivers 6 hp.

What engine does the Schilling Franz have?

1 cylinders, 247 cm³ displacement, 2-Takt Gemisch / Benzin.

How fast does the Schilling Franz go?

Top speed is 15 km/h.

When was the Schilling Franz built?

Production years: 1949–1952.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare