Scania TORPEDO 730ST
Built: 2017 · Series: TORPEDO
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania Torpedo – collective page of bonneted trucks with a 16-litre V8 engine under the Scandinavian nickname of the T-series: 8 versions from 520ST to 770ST, 18 to 30 tonnes gross vehicle weight
“Torpedo” is the nickname used in Scandinavia for the bonneted version of Scania trucks, named after the elongated, torpedo-shaped bonnet. This collective page lists Torpedo models with the ST power designation (520ST to 770ST), where the number gives the rated output in metric horsepower. All versions carry the 16-litre V8 engine, the top unit of Scania's 4-series.
Read on 3 more paragraphs
The register lists 8 versions from eight-cylinder engines of 15,607 to 16,353 cm³. Unladen weights range from 8,875 to 19,931 kg, gross vehicle weights from 18,000 to 30,000 kg, lengths from 6,950 to 10,400 mm and widths of 2,550 mm.
With power steps up to 770 hp, the Torpedo range targeted heavy transport, forestry and tractor-unit work with high trailer loads; the bonneted layout eased servicing and roadside repairs, a practical advantage in Scandinavia's sparsely populated regions. Until European bonneted-truck production ended, the Torpedo range remained a niche alongside Scania's cab-over models.
When buying Torpedo vehicles, check the condition of the V8 engine and its cooling, rust on the frame and bonnet mounts, the condition of the fifth wheel on tractor units, and, at the higher power steps, the condition of the clutch and drivetrain under full load. Drivetrain and chassis parts are supplied through the Scania network, while bonnet parts are the domain of specialist suppliers.
Sources: SpecCodex register, model data: Scania Torpedo, Scania (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 16,353 cm³correct |
Dimensions and weights
| Length | 7,460 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,250 mmcorrect |
| Unladen weight | 10,492 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania TORPEDO 730ST weigh?
The unladen weight is 10,492 kg.
What is the gross vehicle weight of the Scania TORPEDO 730ST?
28,000 kg.
What engine does the Scania TORPEDO 730ST have?
8 cylinders, 16,353 cm³ displacement.
What are the dimensions of the Scania TORPEDO 730ST?
7,460 mm × 2,550 mm.
When was the Scania TORPEDO 730ST built?
Production years: 2017.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
