Scania R380 LB4X2MLB
Built: 2006 · Series: R380
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania R380 – the 380 hp long-haul truck with high cab: R for the large sleeper cab, 380 as a direct power rating in hp, six-cylinder of 10.6 to 11.7 litres, as tractor unit and flatbed vehicle
Scania, based in Södertälje, has built trucks since 1902 and in 2004 introduced the PGRT range with a type logic in which the number behind the cab letter directly gives the engine output in hp. The letter R stands for the large, tall long-haul cab with full sleeping comfort, as opposed to the lower distribution cab P. The designation R380 thus denotes a truck with around 380 hp engine output; the register lists both tractor-unit versions for semi-trailers and chassis with flatbed or box bodies in various wheel formulas from 4X2 to 6X2.
Read on 3 more paragraphs
The register lists here 7 versions with outputs of 279 to 280 kW, six-cylinders of 10,640 to 11,705 cm³, unladen weights of 7,050 to 11,000 kg, a gross vehicle weight of 18,600 to 25,700 kg, lengths of 5,940 to 10,200 mm and widths of 2,450 to 2,600 mm.
The R380 was among the most widely built long-haul trucks of the PGRT generation, sought in European long-distance haulage, where the large R cab allowed drivers multi-day runs with full sleeping comfort.
On a used example, operating hours and mileage of the six-cylinder, the condition of clutch, gearbox and fifth wheel on tractor units, rust on the chassis after years of long-haul use, and brakes, suspension and the long-haul cab fittings all count; parts run through the Scania service network.
Sources: SpecCodex register, model data: Scania R380, Scania (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 11,705 cm³correct |
Dimensions and weights
| Length | 10,000 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Wheelbase | 5,700 mmcorrect |
| Unladen weight | 7,840 kgcorrect |
| Gross vehicle weight | 18,600 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania R380 LB4X2MLB weigh?
The unladen weight is 7,840 kg.
What is the gross vehicle weight of the Scania R380 LB4X2MLB?
18,600 kg.
What engine does the Scania R380 LB4X2MLB have?
6 cylinders, 11,705 cm³ displacement.
What are the dimensions of the Scania R380 LB4X2MLB?
10,000 mm × 2,450 mm.
When was the Scania R380 LB4X2MLB built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
