Sany STC200
Series: Sany Hydraulic Truck Crane
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sany Hydraulic Truck Crane – the QY25C and the STC range from STC200 to STC750, 213 to 275 kW, 26 to 46 tonnes crane vehicle weight
Sany, founded in 1989 in Hunan and headquartered in Changsha, ranks among China's largest construction-equipment makers and among the leading truck-crane brands worldwide. The type logic: QY is the standardised Chinese abbreviation for a truck crane (a crane on its own chassis), and the following number gives the maximum lifting capacity in tonnes – QY25C is thus a 25-tonne crane. Sany's own STC range (Sany Truck Crane) follows the same logic: STC200 to STC750 denote capacities of 20 to 75 tonnes, with H marking a version with greater hook height.
Read on 3 more paragraphs
The register lists here 6 versions with 213 to 275 kW, all from six-cylinder engines, crane vehicle weights from 26,400 to 46,000 kg, torque from 1,050 to 1,500 Nm and a rated speed of about 2,100 rpm.
Truck cranes in this class lift loads of 20 to 75 tonnes on building sites, at installation work and in civil engineering, and travel to the job on public roads on their own chassis. From the 2000s Sany's STC range competed against established suppliers such as Liebherr and Tadano and the Chinese rivals XCMG and Zoomlion, building the brand's share of the mid-capacity segment.
On a used truck crane, the condition of the telescopic boom and its sliding pads, the hoist winch and wire ropes, the hydraulic cylinders of boom and outriggers, the chassis and axles for road use, and the inspection history of the crane superstructure, which in most countries must be periodically examined by a qualified inspector, all count. Spare parts run through Sany's international dealer network.
Sources: SpecCodex register, model data: Sany Hydraulic Truck Crane, Sany Group (manufacturer)
Technical data
Engine
| Power | 289.7 hp (213 kW)correct |
|---|---|
| Rated speed | 2,100 rpmcorrect |
| Torque | 1,050.1 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 6correct |
| Aspiration | water-cooledcorrect |
Dimensions and weights
| Ground clearance | 222.5 mmcorrect |
|---|---|
| Unladen weight | 26,400 kgcorrect |
Drivetrain and chassis
| Tyre size | 11.00-20correct |
|---|
Where this model stands
Power-to-weight ratio: 8.1 kW/t (213 kW / 26.4 t)
Stronger than 46% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Sany STC200 have?
The Sany STC200 delivers 290 hp.
How much does the Sany STC200 weigh?
The unladen weight is 26,400 kg.
What engine does the Sany STC200 have?
6 cylinders.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.
