Santana PS 10
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Santana – other models: the collective page of Spanish off-roaders outside the named ranges, from the licensed Land Rover to the Iveco Massif, 1.3 to 3.0-litre four-cylinders, unladen weights 1,035–2,500 kg
Santana Motor of Linares in Andalusia built licensed Land Rover models for the Spanish market from 1958, visible in the model names Land Rover Santana Serie 3 and Landrover 88; after licensed production ended, Santana developed its own off-roader and pick-up, the PS-10, which the company also marketed as the Iveco Massif from 2007 in cooperation with Iveco, before vehicle production ended in 2011.
Read on 4 more paragraphs
The register lists here 17 versions from four-cylinders of 1,298 to 2,998 cm³, unladen weights from 1,035 to 2,500 kg, gross weights from 1,400 to 3,300 kg and widths from 1,510 to 1,850 mm.
The licensed Land Rovers shaped Spanish agriculture and the Guardia Civil for decades, while the PS-10 and Iveco Massif targeted forestry, municipal and expedition users but remained niche models alongside the big off-road brands.
On a used example, as with the British original, rust on the chassis and floor pan and the condition of the leaf springs matter on the licensed Land Rovers, while on the PS-10 and Iveco Massif the history of the Iveco-Sofim diesel engine and the availability of parts, which runs through the smaller dealer network, count.
With gross weights up to 3.3 tonnes, the PS-10 and Iveco Massif also fall into the EU vehicle class N1 and can be driven on a category B licence; their permanent or selectable four-wheel drive works through a transfer case with a low-range gear, as did the licensed Land Rover models in this range.
Sources: SpecCodex register, model data: Santana
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,800 cm³correct |
Dimensions and weights
| Width | 1,750 mmcorrect |
|---|---|
| Wheelbase | 2,770 mmcorrect |
| Unladen weight | 2,265 kgcorrect |
| Gross vehicle weight | 3,300 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Santana PS 10 weigh?
The unladen weight is 2,265 kg.
What is the gross vehicle weight of the Santana PS 10?
3,300 kg.
What engine does the Santana PS 10 have?
4 cylinders, 2,800 cm³ displacement.
When was the Santana PS 10 built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
109
2,5B DL S
2500 D GRUA ARRASTRE
C014
IVECO MASSIF
LAND ROVER SANTANA SERIE 3
LANDROVER 88
LANDROVER SANTANA ESPECIAL
NON DEFINI
PS
PS 10 PICK UP
PS10
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.