Samro SR 121 FHP
Built: 2000 · Series: SR
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Samro SR – semi-trailer range from SR 121 to SR 334, FHP, SPD and DCP/DCR variants, 4,580 to 10,560 kg unladen weight, 20,000 to 40,000 kg gross weight
The Samro SR range runs from the SR 121 to the SR 334, with the SR 233 in between offered with the equipment suffixes FHP, SPD, DCP and DCR. The three-digit base number distinguishes the size classes, while the attached letter codes mark different axle and brake variants of each version.
Read on 3 more paragraphs
The register lists here 12 versions with unladen weights from 4,580 to 10,560 kg, gross weights from 20,000 to 40,000 kg, lengths from 11,520 to 14,040 mm and widths from 2,510 to 2,600 mm.
With gross weights from 20 to 40 tonnes and lengths of over 14 metres, the SR semi-trailers are built for heavy long-haul freight transport; such semi-trailers are switched between different tractor units at hauliers and stay in long-haul service for many years. As a semi-trailer the SR is coupled to a tractor unit and driven in professional haulage with a CE driving licence.
When buying a used semi-trailer of this size, what counts is the condition of the frame and kingpin, the function of the brakes and air suspension, corrosion on load-bearing parts, and the condition of the axles and tyres; parts for the running gear and braking system are available through the general commercial vehicle trade. The landing legs, the connections for brake lines and the electrical socket, and the ABS and EBS electronics also belong in the pre-purchase check.
Sources: SpecCodex register, model data: Samro SR
Technical data
Dimensions and weights
| Length | 11,740 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 7,400 mmcorrect |
| Unladen weight | 8,960 kgcorrect |
| Gross vehicle weight | 21,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Samro SR 121 FHP weigh?
The unladen weight is 8,960 kg.
What is the gross vehicle weight of the Samro SR 121 FHP?
21,500 kg.
Up to what speed is the Samro SR 121 FHP approved?
Approved up to 100 km/h.
What are the dimensions of the Samro SR 121 FHP?
11,740 mm × 2,600 mm.
When was the Samro SR 121 FHP built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
