Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME Deutz Fahr › Agroclimber - Reihe › Agroclimber V 70

SAME Deutz Fahr Agroclimber V 70

Built: 2007 · Series: Agroclimber - Reihe

More machines from model year 2007

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Agroclimber V 70 from SAME Deutz Fahr is part of the Agroclimber - Reihe series. Production: 2007. The engine delivers 70 hp (51.5 kW), has 3 cylinders, with a displacement of 3,000 cm³. Torque is 260 Nm. Rated speed is 2,350 rpm. The machine is 3,039 mm long, 1,180 mm wide and 1,142 mm high. The unladen weight is 3,100 kg. The wheelbase measures 1,345 mm. Ground clearance is 250 mm. Top speed is 11.2 km/h. Transmission: 8V / 8R. Drive: Kette. The engine is Flüssigkeitskühlung. Tyres: front Kette 280 ( 310 ), rear Kette 280 ( 310 ). The fuel is diesel. The bore measures 105 mm. The stroke is 115.5 mm. The compression ratio is 16:1. Maximum torque is reached at 1,400 rpm. The Agroclimber - Reihe series covers 8 models. Rated output within it ranges from 70 to 102 hp; the Agroclimber V 70 sits at the bottom of that range with 70 hp. Its immediate neighbours are the Agroclimber V 80 above it with 76 hp. Unladen weight within it ranges from 2,630 to 5,200 kg; here the Agroclimber V 70 sits in the lower part of that range with 3,100 kg. 200 SAME Deutz Fahr models across 35 series are on record.

Deutz-Fahr Agroclimber: built for the steep slope, 70 to 102 hp, three- and four-cylinder diesels, F (Frutteto) and V variants for specialty crops

As the name suggests, the Agroclimber series targets mountain and steep-slope farms — a segment where Deutz-Fahr competed against established hillside specialists with a low centre of gravity and special chassis.

Read on 4 more paragraphs

The register lists 8 live models, from the Agroclimber F 90 to the Agroclimber 410, built in 2007 and 2009. Output ranges from 51.5 to 75 kW, or 70 to 102 hp, weight from 2,630 to 5,200 kg, displacement from 3,000 to 4,000 cm3, across three- and four-cylinder engines.

Various model suffixes such as F (Frutteto) show that Deutz-Fahr also adapted the Agroclimber series to different specialty-crop and mountain-farming requirements.

For operations in the Alps and mid-mountain regions, this series offered an alternative to dedicated hillside specialists such as Lindner or Reform.

When buying a used Agroclimber, clutch and gearbox condition, the tightness of the lift hydraulics, and rust on chassis and mudguards after use on steep terrain matter, plus, on the F and V variants, the availability of matching narrow tyres. Parts run through the SAME Deutz-Fahr group's dealer network, which as an active company continues to support older series too. PTO and three-point hitch correspond in this power class to ISO 730 Category II at 540 rpm, sufficient for the implements typical of mountain farming.

Sources: SpecCodex register, model data: Deutz-Fahr Agroclimber

Technical data

Engine

Fueldieselcorrect
Power70 hp (51.5 kW)correct
Rated speed2,350 rpmcorrect
Torque260 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders3correct
Displacement3,000 cm³correct
Bore105 mmcorrect
Stroke115.5 mmcorrect
Compression ratio16correct
Coolingliquid-cooledcorrect

Dimensions and weights

Length3,039 mmcorrect
Width1,180 mmcorrect
Height1,142 mmcorrect
Wheelbase1,345 mmcorrect
Ground clearance250 mmcorrect
Unladen weight3,100 kgcorrect

Drivetrain and chassis

DriveKettecorrect
Gearbox8V / 8Rcorrect
Front tyresKette 280 ( 310 )correct
Rear tyresKette 280 ( 310 )correct
Top speed11.2 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.6 kW/t (52 kW / 3.1 t)

Power class: Universal (40–100 hp)

Stronger than 48% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME Deutz Fahr Agroclimber V 70 have?

The SAME Deutz Fahr Agroclimber V 70 delivers 70 hp.

How much does the SAME Deutz Fahr Agroclimber V 70 weigh?

The unladen weight is 3,100 kg.

What engine does the SAME Deutz Fahr Agroclimber V 70 have?

3 cylinders, 3,000 cm³ displacement, Diesel.

How fast does the SAME Deutz Fahr Agroclimber V 70 go?

Top speed is 11.2 km/h.

What are the dimensions of the SAME Deutz Fahr Agroclimber V 70?

3,039 mm × 1,180 mm × 1,142 mm.

When was the SAME Deutz Fahr Agroclimber V 70 built?

Production years: 2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare