Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › Expert › EXPERT 2.0 HDI

Peugeot EXPERT 2.0 HDI

Built: 2004-2010 · Series: Expert

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Peugeot EXPERT 2.0 HDI belongs to the Expert series. Production: 2004-2010. The engine delivers 80 kW, has 4 cylinders, with a displacement of 1,997 cm³. The vehicle is 4,760 mm long and 1,850 mm wide. The unladen weight is 1,575 kg. The wheelbase measures 3,120 mm. The gross vehicle weight is 2,330 kg. The vehicle runs on 4 wheels. The gearbox offers 5 gears. The Expert series covers 83 models. Rated output within it ranges from 51 to 130 kW; the EXPERT 2.0 HDI sits in the lower part of that range with 80 kW. Its immediate neighbours are the FOURGON 2.0HDI-BYRHXB below it with 69 kW and the Expert Sk 2,0 HDI above it with 88 kW. Unladen weight within it ranges from 1,400 to 2,475 kg; here the EXPERT 2.0 HDI sits in the lower part of that range with 1,575 kg. 1709 Peugeot models across 26 series are on record.

Peugeot Expert – the French compact van since 1995: L1 to L3 as length variants, H1/H2 as roof-height variants, HDi and BlueHDi diesel engines of 1.6 and 2.0 litres, 51 to 130 kW

The Peugeot Expert has been Peugeot's mid-size compact van since 1995 and was built at the joint Sevel Nord plant in northern France alongside the identical Citroën Jumpy and, until 2007, the Fiat Scudo. The first generation ran until 2007, the second until 2016 with a considerably expanded HDi diesel programme, and the third generation from 2016 uses the PSA EMP2 platform, shared since then with the new Citroën Jumpy and the Toyota Proace. The type logic orders the vehicle length with L1 to L3 and the roof height with H1/H2, while the HDi and BlueHDi designations mark successive generations of diesel technology with four-cylinders of 1.6 to 2.0 litres.

Read on 3 more paragraphs

The register lists here 83 versions with outputs from 51 to 130 kW, displacements from 1,560 to 2,184 cm³, throughout four-cylinder, unladen weights from 1,288 to 2,475 kg, gross weights from 1,825 to 3,230 kg, lengths from 4,440 to 5,350 mm and widths from 1,750 to 2,050 mm.

The Expert competes in the European tradesman's van segment with the Volkswagen Transporter, Ford Transit Custom and Renault Trafic, and through the PSA sister models Jumpy and (formerly) Scudo is closely related technically, which eases parts availability.

On the HDi and BlueHDi engines, the condition of the particulate filter and EGR valve, the timing belt changed at the prescribed interval, the clutch and dual-mass flywheel, rust at the wheel arches and sliding-door rails, and the suspension under persistently high loads all count; parts run through the PSA/Stellantis network.

Sources: SpecCodex register, model data: Peugeot Expert, Peugeot (Stellantis, Hersteller)

Technical data

Engine

Power80 kWcorrect
Cylinders4correct
Displacement1,997 cm³correct

Dimensions and weights

Length4,760 mmcorrect
Width1,850 mmcorrect
Wheelbase3,120 mmcorrect
Unladen weight1,575 kgcorrect
Gross vehicle weight2,330 kgcorrect

Drivetrain and chassis

Gears5correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 50.8 kW/t (80 kW / 1.6 t)

Stronger than 41% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot EXPERT 2.0 HDI have?

The Peugeot EXPERT 2.0 HDI delivers 80 kW.

How much does the Peugeot EXPERT 2.0 HDI weigh?

The unladen weight is 1,575 kg.

What is the gross vehicle weight of the Peugeot EXPERT 2.0 HDI?

2,330 kg.

What engine does the Peugeot EXPERT 2.0 HDI have?

4 cylinders, 1,997 cm³ displacement.

What are the dimensions of the Peugeot EXPERT 2.0 HDI?

4,760 mm × 1,850 mm.

When was the Peugeot EXPERT 2.0 HDI built?

Production years: 2004-2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
2 current listings for Peugeot EXPERT 2.0 HDI on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare