Peugeot 2.0 HDI L2 EAT6
Built: 2018 · Series: Expert
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Peugeot Expert – the French compact van since 1995: L1 to L3 as length variants, H1/H2 as roof-height variants, HDi and BlueHDi diesel engines of 1.6 and 2.0 litres, 51 to 130 kW
The Peugeot Expert has been Peugeot's mid-size compact van since 1995 and was built at the joint Sevel Nord plant in northern France alongside the identical Citroën Jumpy and, until 2007, the Fiat Scudo. The first generation ran until 2007, the second until 2016 with a considerably expanded HDi diesel programme, and the third generation from 2016 uses the PSA EMP2 platform, shared since then with the new Citroën Jumpy and the Toyota Proace. The type logic orders the vehicle length with L1 to L3 and the roof height with H1/H2, while the HDi and BlueHDi designations mark successive generations of diesel technology with four-cylinders of 1.6 to 2.0 litres.
Read on 3 more paragraphs
The register lists here 83 versions with outputs from 51 to 130 kW, displacements from 1,560 to 2,184 cm³, throughout four-cylinder, unladen weights from 1,288 to 2,475 kg, gross weights from 1,825 to 3,230 kg, lengths from 4,440 to 5,350 mm and widths from 1,750 to 2,050 mm.
The Expert competes in the European tradesman's van segment with the Volkswagen Transporter, Ford Transit Custom and Renault Trafic, and through the PSA sister models Jumpy and (formerly) Scudo is closely related technically, which eases parts availability.
On the HDi and BlueHDi engines, the condition of the particulate filter and EGR valve, the timing belt changed at the prescribed interval, the clutch and dual-mass flywheel, rust at the wheel arches and sliding-door rails, and the suspension under persistently high loads all count; parts run through the PSA/Stellantis network.
Sources: SpecCodex register, model data: Peugeot Expert, Peugeot (Stellantis, Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,997 cm³correct |
Dimensions and weights
| Width | 1,920 mmcorrect |
|---|---|
| Wheelbase | 3,280 mmcorrect |
| Unladen weight | 1,752 kgcorrect |
| Gross vehicle weight | 2,760 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Peugeot 2.0 HDI L2 EAT6 weigh?
The unladen weight is 1,752 kg.
What is the gross vehicle weight of the Peugeot 2.0 HDI L2 EAT6?
2,760 kg.
What engine does the Peugeot 2.0 HDI L2 EAT6 have?
4 cylinders, 1,997 cm³ displacement.
When was the Peugeot 2.0 HDI L2 EAT6 built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
, BLEUHDI 122 L3 EAT8
, BLUEHDI 180 L3 EAT6
1.6HDI 90
1.6I
1.9D
1.9D-BZWJZA-FOURGON/282
2, 0 HDI 128 HK L2H2
2,0 HDI 163 L2H1
2,0HDI
2.0 16V
2.0 BLEUHDI 120 HK L3
2.0 BLUE HDI 180 L3 EAT6
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.