Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Peugeot › Other models › BOXER-233K92/370

Peugeot BOXER-233K92/370

Built: 1996-1997 · Series: Other models

More machines from model year 1996

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The BOXER-233K92/370 comes from Peugeot. Production: 1996-1997. The engine delivers 76 kW, with a displacement of 2,440 cm³. The vehicle is 5,875 mm long and 2,095 mm wide. The unladen weight is 2,310 kg. The gross vehicle weight is 3,510 kg. Rated output across the Peugeot range ranges from 28 to 130 kW; the BOXER-233K92/370 sits in the middle of that range with 76 kW. Its immediate neighbours are the BOXER FOURGON 2.2HDI below it with 75 kW and the BOXER FOURGON 2.5TD-233J44/370 above it with 79 kW. Unladen weight across the Peugeot range ranges from 890 to 3,750 kg; here the BOXER-233K92/370 sits in the middle of that range with 2,310 kg. 1709 Peugeot models across 26 series are on record.

Peugeot – other models: the collection page for Boxer chassis outside the named ranges plus the Theault First'Eo, 2.0 to 3.0-litre diesels, 63 to 130 kW

This page gathers Peugeot commercial vehicles the register could not assign to a named range — mostly versions of the Boxer, the large van Peugeot builds together with Fiat (Ducato) and Citroën (Jumper) on the Sevel platform. Type codes such as 233K42 or 233N92 denote the gross-weight class, body style and wheelbase of the respective Boxer chassis, "Double Cabin" the crew cab, "Fourgon" the closed panel body; alongside these, the page also lists "First'Eo" and "Firsteo", a utility variant built by the French coachbuilder Theault, and "Umpikorinen (BB)", a Boxer registered under Finland's closed-body vehicle class.

Read on 3 more paragraphs

The register lists 16 versions here with 63 to 130 kW from four- to six-cylinder engines of 1,993 to 2,999 cm³ displacement, weights of 1,640 to 3,750 kg, gross vehicle weights of 3,510 to 8,140 kg, lengths of 5,510 to 8,420 mm and widths of 1,620 to 2,390 mm.

The Boxer serves the mid and upper van segment in competition with the VW Crafter, Mercedes-Benz Sprinter and Iveco Daily, and is converted by numerous body builders into box trucks, refrigerated vehicles and motorhomes; the smaller special variants such as the First'Eo instead serve niches for inner-city delivery traffic.

On a used example, check rust on the rear wheel arches and door sills typical of the Sevel platform, the timing belt change on the HDi diesel engines, the condition of the clutch under sustained heavy loads, and on the heavier chassis variants the rear leaf springs; on conversions by Theault and other coachbuilders, also check the body mounting points.

Sources: SpecCodex register, model data: Peugeot (weitere Modelle), Peugeot (Stellantis, Hersteller), Zulassungsdaten RDW (Niederlande)

Technical data

Engine

Power76 kWcorrect
Displacement2,440 cm³correct

Dimensions and weights

Length5,875 mmcorrect
Width2,095 mmcorrect
Unladen weight2,310 kgcorrect
Gross vehicle weight3,510 kgcorrect

Where this model stands

Power-to-weight ratio: 32.9 kW/t (76 kW / 2.3 t)

Stronger than 2% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot BOXER-233K92/370 have?

The Peugeot BOXER-233K92/370 delivers 76 kW.

How much does the Peugeot BOXER-233K92/370 weigh?

The unladen weight is 2,310 kg.

What is the gross vehicle weight of the Peugeot BOXER-233K92/370?

3,510 kg.

What engine does the Peugeot BOXER-233K92/370 have?

2,440 cm³ displacement.

What are the dimensions of the Peugeot BOXER-233K92/370?

5,875 mm × 2,095 mm.

When was the Peugeot BOXER-233K92/370 built?

Production years: 1996-1997.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare