Parcisa CA-3E TSB 4309
Built: 2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Parcisa – other models: Spanish tank and silo semi-trailers outside the named ranges, 18 versions, unladen weight 6,660 to 10,160 kg, gross vehicle weight up to 46 tonnes
Parcisa is a Spanish manufacturer of tank and silo semi-trailers for the road transport of bulk goods and liquids. This collective page gathers versions the register could not assign to a narrower range, with type designations such as CA-2100 or CA-2400 marking internal construction sizes.
Read on 3 more paragraphs
The register lists here 18 versions with unladen weights from 6,660 to 10,160 kg, gross vehicle weights from 39,000 to 46,000 kg, lengths from 9,630 to 12,805 mm and widths from 2,500 to 2,550 mm.
With gross weights up to 46 tonnes, the semi-trailers sit in the segment of classic three-axle tank and silo semi-trailers used to transport grain, feed, cement or liquids in Spanish and European road haulage, a segment served by specialised manufacturers such as Magyar, Feldbinder and OGT. The Spanish origin also shows in the design for long transport routes between agricultural producing regions and ports, as is common in the Spanish grain and feed trade.
When buying used, on silo and tank semi-trailers check above all the vessel wall (corrosion, dents, tightness of valves and pressure relief), the condition of the axle assemblies and braking system, the kingpin, and the function of the compressor or unloading system. Spare parts for valves, compressors and axles run through specialised tanker-vehicle workshops.
Sources: SpecCodex register, model data: Parcisa (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,380 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,460 mmcorrect |
| Unladen weight | 7,000 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Parcisa CA-3E TSB 4309 weigh?
The unladen weight is 7,000 kg.
What is the gross vehicle weight of the Parcisa CA-3E TSB 4309?
45,000 kg.
Up to what speed is the Parcisa CA-3E TSB 4309 approved?
Approved up to 100 km/h.
What are the dimensions of the Parcisa CA-3E TSB 4309?
11,380 mm × 2,550 mm.
When was the Parcisa CA-3E TSB 4309 built?
Production years: 2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
430A4FP
CA - 3CI
CA -3C1
CA-2100-35
CA-2100-36
CA-2150-35
CA-2400-38
CA-3E
CA-3E-TSB4309
CA-3EW
CA-3EW-D
CA-3EWHO
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
