Nordtrak ST 45
Built: 1953–1961 · Series: Stier
More machines from model year 1953
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Nordtrak Stier series: compact small tractors in four versions from ST 45 to Stier 30, 11.8 to 29.3 kW from one- to three-cylinder engines of 1,470 to 2,360cc, 1,530 to 2,500 kg kerb weight
The Stier series brings together in the register a compact small tractor in four versions: ST 45, Stier 18, Stier 25 and Stier 30. These are one- to three-cylinder diesel tractors in the lower power segment, used on small farms, in orchards and vineyards and for municipal tasks; the short wheelbase and narrow track suit work in confined spaces. The narrow track also eases manoeuvring around farm buildings and through narrow gateways.
Read on 3 more paragraphs
The register lists 4 versions with 11.8 to 29.3 kW from one- to three-cylinder engines of 1,470 to 2,360cc, kerb weights from 1,530 to 2,500 kg, lengths from 2,600 to 3,290 mm, widths from 1,600 to 1,690 mm, heights from 1,700 to 1,875 mm and a rated speed of 1,500 rpm.
In this power segment, small tractors such as the Stier series compete with Asian compact tractors and smaller ranges from European manufacturers designed for grassland maintenance, transport work and work between row crops. Many such small tractors also found their way into equipment rental fleets serving smallholders.
When buying used, check operating hours, clutch and gearbox condition, diesel engine oil-tightness and corrosion on the chassis and bodywork; for such small and older series it is worth checking parts availability before buying, as distribution networks for small tractors are often regionally limited.
Sources: SpecCodex register, model data: Nordtrak Stier
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 40 hp (29.3 kW)correct |
| Rated speed | 1,500 rpmcorrect |
| Cylinders | 3correct |
| Bore | 100 mmcorrect |
| Stroke | 120 mmcorrect |
| Cooling | circulating coolingcorrect |
Dimensions and weights
| Length | 3,290 mmcorrect |
|---|---|
| Width | 1,620 mmcorrect |
| Height | 1,875 mmcorrect |
| Ground clearance | 370 mmcorrect |
| Unladen weight | 2,500 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 5V/1Rcorrect |
| Front tyres | 10-28 AScorrect |
| Rear tyres | 10-28 AScorrect |
| Top speed | 29.3 km/hcorrect |
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|
Where this model stands
Power-to-weight ratio: 11.7 kW/t (29 kW / 2.5 t)
Power class: Compact (< 40 hp)
Stronger than 25% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Nordtrak ST 45 have?
The Nordtrak ST 45 delivers 40 hp.
How much does the Nordtrak ST 45 weigh?
The unladen weight is 2,500 kg.
What engine does the Nordtrak ST 45 have?
3 cylinders, Diesel.
How fast does the Nordtrak ST 45 go?
Top speed is 29.3 km/h.
What are the dimensions of the Nordtrak ST 45?
3,290 mm × 1,620 mm × 1,875 mm.
When was the Nordtrak ST 45 built?
Production years: 1953–1961.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.