Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › T6030 › T6030 Delta Series

New Holland T6030 Delta Series 2WD

Series: T6030

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the T6030 Delta Series 2WD, New Holland offers a model from the T6030 series. The engine delivers 116.6 hp (85.8 kW), has 6 cylinders, with a displacement of 6,751.5 cm³. Rated speed is 2,200 rpm. The wheelbase measures 2,654.8 mm. Lifting capacity is 3,406 kg. The tank holds 253.6 litres. The gearbox has 12 forward gears. There are also 12 reverse gears. PTO output is 95 hp. The pump delivers 102.6 l/min. The hydraulic tank holds 64.7 litres. The oil fill is 15.1 litres. The electrical system runs on 12 V. The T6030 series covers 10 models. 1448 New Holland models across 71 series are on record.

New Holland T6030 (2007–2012) – the 117 hp six-cylinder from Basildon: Delta, Plus and Elite as equipment lines, NEF engine of 6.75 litres, Range Command and Power Command, 71 to 86 kW, 95 hp at the PTO

The T6030 belongs to the T6000 range with which New Holland replaced the TS-A range in 2007 – built in Basildon, England, the tractor plant that has belonged to Ford since 1964 and to New Holland afterwards. The type logic: T marks the tractor ranges of the blue programme, 6 the mid-class range, 030 the power step within the range – the T6030 with 117 hp rated power is the middle model between T6010 and T6090. The equipment lines follow the suffix: Delta the simple version with mechanical transmission and without power boost, Plus the medium, Elite the upper one with Power Command powershift, front-axle suspension and electronic hydraulics; Range Command and Power Command denote the semi- and full-powershift transmissions. The engine in all versions is FPT's NEF six-cylinder of 6.75 litres, on Plus and Elite with power boost for PTO and transport work – the register span of 70.8 to 86 kW shows rated and maximum power.

Read on 3 more paragraphs

The register lists 10 versions with 70.8 to 86 kW from the six-cylinder of 6,751 cm³ at 2,200 rpm, torque from 520 to 572 Nm, 95 hp at the PTO, lift capacities from 3,406 to 5,539 kg, unladen weights from 5,020 to 5,580 kg, lengths from 4,320 to 4,950 mm, widths from 2,280 to 2,550 mm and heights from 2,805 to 3,040 mm.

The T6030 is the typical all-rounder of the Western European family farm – six-cylinder smoothness at 117 hp, a concept New Holland continued with the T6.140 and T6.150.

On used tractors, operating hours, the condition of engine and injection (common rail from Tier 3), transmission (Range Command clutches), front-axle suspension on Elite, hydraulics and electronics and parts supply through CNH are what count.

Sources: SpecCodex register, model data: New Holland T6030, New Holland Agriculture (manufacturer)

Technical data

Engine

Power116.6 hp (85.8 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,751.5 cm³correct
Aspirationturbocharged, intercooledcorrect
Engine oil capacity15.1 lcorrect

Dimensions and weights

Wheelbase2,654.8 mmcorrect

Drivetrain and chassis

Gearbox type12x12 SynchroCommadcorrect
Forward gears12correct
Reverse gears12correct

Working data

Lifting capacity3,406 kgcorrect
Pump flow102.6 l/mincorrect
Hydraulic oil capacity64.7 lcorrect
Fuel tank capacity253.6 lcorrect

Other data

PTO output95 hpcorrect
System voltage12 Vcorrect

Frequently asked questions

How much power does the New Holland T6030 Delta Series have?

The New Holland T6030 Delta Series delivers 117 hp.

What engine does the New Holland T6030 Delta Series have?

6 cylinders, 6,752 cm³ displacement.

What is the PTO output of the New Holland T6030 Delta Series?

PTO output is 95 hp.

How much does the rear linkage of the New Holland T6030 Delta Series lift?

The rear linkage lifts 3,406 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare