Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › T6020 › T6020 Delta Series

New Holland T6020 Delta Series 2WD

Series: T6020

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland T6020 Delta Series 2WD belongs to the T6020 series. The engine delivers 111.5 hp (82 kW), has 4 cylinders, with a displacement of 4,501.5 cm³. Rated speed is 2,200 rpm. The wheelbase measures 2,371.3 mm. Lifting capacity is 3,406 kg. The tank holds 179.8 litres. The gearbox has 12 forward gears. There are also 12 reverse gears. PTO output is 90 hp. The pump delivers 102.6 l/min. The hydraulic tank holds 64.7 litres. The oil fill is 10.2 litres. The electrical system runs on 12 V. The T6020 series covers 8 models. 1448 New Holland models across 71 series are on record.

New Holland T6020 (2007–2012) – the four-cylinder entry to the T6000 range from Basildon: 112 hp from 4.5 litres, Delta, Plus and Elite as equipment lines, Range Command and Power Command, 67 to 97 kW, 90 hp at the PTO

The T6020 was the smallest model of the T6000 range with which New Holland replaced the TS-A range in 2007 – built in Basildon, England, and as a four-cylinder the entry to the mid-range, while the sister models from the T6030 upward carry six-cylinders. The type logic: T marks the tractor ranges of the blue programme, 6 the mid-range series, 020 the lowest power step; the equipment lines follow the suffix: Delta the simple version with mechanical transmission, Plus the medium, Elite the upper one with Power Command powershift, front-axle suspension and electronic hydraulics. The engine is FPT's NEF four-cylinder of 4.5 litres at 2,200 rpm, 112 hp rated, and on Plus and Elite with power boost for PTO and transport work, which explains the register span up to 97 kW.

Read on 3 more paragraphs

The register lists 8 versions with 67.1 to 97 kW from the four-cylinder of 4,485 to 4,502 cm³, torque from 476 to 533 Nm, 90 hp at the PTO, lift capacities from 3,406 to 5,539 kg, unladen weights from 4,720 to 5,575 kg, lengths from 4,320 to 4,950 mm, widths from 2,280 to 2,500 mm and heights from 2,805 to 2,985 mm.

The T6020 is the compact all-rounder for grassland and dairy farms that value the short wheelbase of the four-cylinder for front loader and yard work; its successor is the T6.120 of the T6 range.

On used tractors, operating hours, the condition of engine and injection, transmission (Range Command clutches on Plus and Elite), front-axle suspension, loader mounting and hydraulics, cab and electronics and parts supply through CNH count.

Sources: SpecCodex register, model data: New Holland T6020, New Holland Agriculture (manufacturer)

Technical data

Engine

Power111.5 hp (82 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,501.5 cm³correct
Aspirationturbocharged, intercooledcorrect
Engine oil capacity10.2 lcorrect

Dimensions and weights

Wheelbase2,371.3 mmcorrect

Drivetrain and chassis

Gearbox type12x12 SynchroCommandcorrect
Forward gears12correct
Reverse gears12correct

Working data

Lifting capacity3,406 kgcorrect
Pump flow102.6 l/mincorrect
Hydraulic oil capacity64.7 lcorrect
Fuel tank capacity179.8 lcorrect

Other data

PTO output90 hpcorrect
System voltage12 Vcorrect

Frequently asked questions

How much power does the New Holland T6020 Delta Series have?

The New Holland T6020 Delta Series delivers 112 hp.

What engine does the New Holland T6020 Delta Series have?

4 cylinders, 4,502 cm³ displacement.

What is the PTO output of the New Holland T6020 Delta Series?

PTO output is 90 hp.

How much does the rear linkage of the New Holland T6020 Delta Series lift?

The rear linkage lifts 3,406 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare