New Holland TD 95
Series: TD
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The New Holland TD 95 is part of the entry‑level TD tractor series, built in Turkey and India. It is an agricultural tractor delivering 98 hp (72.1 kW) from a 3 908 cm³ four‑cylinder engine, with a rated speed of 2 500 rpm and a peak torque of 280 Nm. Its width is 1 975 mm, height 2 652 mm and the fuel tank holds 92 l. Available transmissions are 12 F/12 R, 20 F/12 R and 12 F/4 R, and it belongs to the Cat I/II lift‑capacity category.
With 72.1 kW the TD 95 ranks second in power among the seven models of the TD line. The next smaller model, TD 90 D, produces 65.5 kW, while the next larger model, TD 5.115, provides 84 kW. The series spans from 43.4 kW to 84 kW, placing the TD 95 near the upper end of the range, offering more pulling capability than the lower‑powered units but less than the top model.
Within the TD family the TD 95 is the second‑most powerful unit, situated between the TD 90 D and the TD 5.115, with power practically equal to the TD 5.95. The series covers a power span of 43.4 kW to 84 kW, making the TD 95 suitable for tasks that require more power than the basic models but do not need the maximum available output.
New Holland TD – the entry-level range from Turkey and India, from the TD 60D and TD 95 to the TD 5 series (TD 5.75 to TD 5.115), 43.4 to 84 kW, three- and four-cylinders
This page gathers the versions of the New Holland TD, the brand's entry-level range, built in Turkey and in India. The older types TD 60D, TD 90D, TD 95 and TD 95D give the power class in the two-digit number before the letter D for the diesel version; the newer TD 5.75 to TD 5.115 models follow the TD 5 logic, in which the digit after the point roughly gives the power class in hp.
Read on 3 more paragraphs
The register lists here 13 versions with 43.4 to 84 kW (59 to 99 hp) from three- and four-cylinders of 2,931 to 4,485 cm³ displacement, unladen weights of 3,420 to 3,900 kg, gross weights of 5,900 to 6,800 kg, lengths of 3,650 to 4,280 mm, widths of 1,799 to 2,550 mm, heights of 2,555 to 2,665 mm, torques of 181 to 325 Nm and rated speeds of 2,300 to 2,500 rpm.
The TD range positions New Holland as an affordable entry point below the European T4 and T5 ranges, mainly for markets outside Western Europe, where simple mechanics and a lower purchase cost matter.
On the used TD range, engine condition and the injection pump, clutch and gearbox, and rust on mudguards and cab count; parts run through the New Holland network, though availability on the older D types can vary by region.
Sources: SpecCodex register, model data: New Holland TD, New Holland Agriculture (manufacturer)
Technical data
Engine
| Power | 98 hp (72.1 kW)correct |
|---|---|
| Rated speed | 2,500 rpmcorrect |
| Torque | 280 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 3,908 cm³correct |
Dimensions and weights
| Width | 1,975 mmcorrect |
|---|---|
| Height | 2,652 mmcorrect |
Drivetrain and chassis
| Gearbox | 12 V/12 R, 20 V/12 R and 12 V/4 Rcorrect |
|---|
Working data
| Fuel tank capacity | 92 lcorrect |
|---|
Other data
| Linkage category | Cat I/IIcorrect |
|---|
Frequently asked questions
How much power does the New Holland TD 95 have?
The New Holland TD 95 delivers 98 hp.
What engine does the New Holland TD 95 have?
4 cylinders, 3,908 cm³ displacement.
What are the dimensions of the New Holland TD 95?
1,975 mm × 2,652 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
