New Holland TD 5050
Series: TD
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland TD – the entry-level range from Turkey and India, from the TD 60D and TD 95 to the TD 5 series (TD 5.75 to TD 5.115), 43.4 to 84 kW, three- and four-cylinders
This page gathers the versions of the New Holland TD, the brand's entry-level range, built in Turkey and in India. The older types TD 60D, TD 90D, TD 95 and TD 95D give the power class in the two-digit number before the letter D for the diesel version; the newer TD 5.75 to TD 5.115 models follow the TD 5 logic, in which the digit after the point roughly gives the power class in hp.
Read on 3 more paragraphs
The register lists here 13 versions with 43.4 to 84 kW (59 to 99 hp) from three- and four-cylinders of 2,931 to 4,485 cm³ displacement, unladen weights of 3,420 to 3,900 kg, gross weights of 5,900 to 6,800 kg, lengths of 3,650 to 4,280 mm, widths of 1,799 to 2,550 mm, heights of 2,555 to 2,665 mm, torques of 181 to 325 Nm and rated speeds of 2,300 to 2,500 rpm.
The TD range positions New Holland as an affordable entry point below the European T4 and T5 ranges, mainly for markets outside Western Europe, where simple mechanics and a lower purchase cost matter.
On the used TD range, engine condition and the injection pump, clutch and gearbox, and rust on mudguards and cab count; parts run through the New Holland network, though availability on the older D types can vary by region.
Sources: SpecCodex register, model data: New Holland TD, New Holland Agriculture (manufacturer)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Latvian open data portal (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
