Start › Tractors › New Holland Geotech › TS series › TS 110 (A)

New Holland Geotech TS 110 (A)

Built: 1997–2003 · Series: TS-Baureihe

More machines from model year 1997

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TS 110 (A) from New Holland Geotech is part of the TS series. Production: 1997–2003. The engine delivers 108 hp (84.1 kW), has 4 cylinders, with a displacement of 4,987 cm³. Torque is 426 Nm. Rated speed is 2,070 rpm. The machine is 3,810 mm long, 2,180 mm wide and 2,763 mm high. The unladen weight is 3,949 kg. The wheelbase measures 2,330 mm. Ground clearance is 400 mm. Top speed is 30 km/h. Transmission: 12 V/12 R, 16 V/16 R and 24 V/24 R. The engine is water-cooled. Tyres: front 7.50-16 ASF (A: 14.9 R 28 AS), rear 16.9 R 30 AS (A: 18.4 R 38 AS). The fuel is diesel. The bore measures 111.8 mm. The stroke is 127 mm. The compression ratio is 17.5:1. Maximum torque is reached at 1,409 rpm. Construction: unit construction (no separate frame). The TS-Baureihe series covers 4 models. Rated output within it ranges from 80 to 108 hp; the TS 110 (A) sits at the top of that range with 108 hp. Its immediate neighbours are the TS 115 ES below it with 100 hp. Unladen weight within it ranges from 3,929 to 4,802 kg; here the TS 110 (A) sits at the bottom of that range with 3,949 kg. 32 New Holland Geotech models across 8 series are on record.

New Holland TS series: multi-purpose tractors from the Basildon plant of the 1990s, four types from TS 90 to TS 115 ES, 58.9 to 84.1 kW from four- and six-cylinder engines of 4,987 to 7,480cc

The TS series was introduced in the mid-1990s at New Holland's Basildon plant in Essex, the former Ford tractor factory, as successor to the Ford 40 series and forerunner of the later TM range. TS denotes the mid-to-upper multi-purpose class, available with either a four- or six-cylinder engine; the ES suffix marks a trim level with an electronically controlled powershift step. The model numbers 90 to 115 rank the tractors by power class.

Read on 3 more paragraphs

The register lists 4 versions with 58.9 to 84.1 kW from four- to six-cylinder engines of 4,987 to 7,480cc, torque from 325 to 426 Nm at 2,070 to 2,170 rpm, kerb weights from 3,929 to 4,802 kg, lengths from 3,810 to 4,397 mm, widths from 2,092 to 2,180 mm and heights from 2,726 to 2,788 mm.

The TS series positioned New Holland as a multi-purpose tractor for medium to larger arable farms across Western Europe, competing with the John Deere 6000 series, Case IH MX and Massey Ferguson 6100; Basildon production ensured a close technical kinship with the Case IH sister models.

When buying used, check operating hours, the condition of the powershift (especially on ES versions), engine and hydraulic oil-tightness, and cab suspension and air conditioning; wear parts are widely available through the CNH network, while the electronics of early ES versions are considered more failure-prone.

Sources: SpecCodex register, model data: New Holland TS-Baureihe, New Holland (CNH Industrial, Hersteller)

Technical data

Engine

Fuel	dieselcorrect
Power	108 hp (84.1 kW)correct
Rated speed	2,070 rpmcorrect
Torque	426 Nmcorrect
Speed at max. torque	1,409 rpmcorrect
Cylinders	4correct
Displacement	4,987 cm³correct
Bore	111.8 mmcorrect
Stroke	127 mmcorrect
Compression ratio	17.5correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,810 mmcorrect
Width	2,180 mmcorrect
Height	2,763 mmcorrect
Wheelbase	2,330 mmcorrect
Ground clearance	400 mmcorrect
Unladen weight	3,949 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	12 V/12 R, 16 V/16 R and 24 V/24 Rcorrect
Front tyres	7.50-16 ASF (A: 14.9 R 28 AS)correct
Rear tyres	16.9 R 30 AS (A: 18.4 R 38 AS)correct
Top speed	30 km/hcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 21.3 kW/t (84 kW / 3.9 t)

Power class: Large (100–180 hp)

Stronger than 72% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland Geotech TS 110 (A) have?

The New Holland Geotech TS 110 (A) delivers 108 hp.

How much does the New Holland Geotech TS 110 (A) weigh?

The unladen weight is 3,949 kg.

What engine does the New Holland Geotech TS 110 (A) have?

4 cylinders, 4,987 cm³ displacement, Diesel.

How fast does the New Holland Geotech TS 110 (A) go?

Top speed is 30 km/h.

What are the dimensions of the New Holland Geotech TS 110 (A)?

3,810 mm × 2,180 mm × 2,763 mm.

When was the New Holland Geotech TS 110 (A) built?

Production years: 1997–2003.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →