Start › Motor graders › New Holland › F140

New Holland F140

Series: New Holland Motor Grader

Source: https://agriculture.newholland.com/en-gb/europe/products/agr

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The F140 from New Holland is part of the New Holland Motor Grader series. The engine with a displacement of 5,901 cm³. Rated speed is 2,200 rpm. The unladen weight is 13,535 kg. The wheelbase measures 6,221 mm. Ground clearance is 640.1 mm. The tank holds 340.3 litres. The hydraulic tank holds 94.6 litres. Working pressure is 179 bar. The cooling system holds 40.1 litres. The electrical system runs on 24 V. The engine fitted is the 6BTA5,9 Tier 1. Tyre size: 13,00 x 24 (12PR). The New Holland Motor Grader series covers 15 models. Unladen weight within it ranges from 11,500 to 17,250 kg; the F140 sits in the lower part of that range with 13,535 kg. Its immediate neighbours are the RG140.B below it with 13,506 kg and the F170 above it with 14,550 kg. 502 New Holland models across 32 series are on record. The model is listed under Motor graders. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine model6BTA5.9 Tier 1correct
Rated speed2,200 rpmcorrect
Displacement5,901 cm³correct
Aspirationturbochargedcorrect
Coolant capacity40.1 lcorrect

Dimensions and weights

Length8,522.2correct
Wheelbase6,221correct
Ground clearance640.1correct
Unladen weight13,535 kgcorrect

Drivetrain and chassis

Gearbox typeDirect Drive Power-Shiftcorrect
Tyre size13.00 x 24 (12PR)correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity94.6 lcorrect
Hydraulic pressure179correct
Fuel tank capacity340.3 lcorrect

Frequently asked questions

How much does the New Holland F140 weigh?

The unladen weight is 13,535 kg.

What engine does the New Holland F140 have?

5,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

F106.6

F106.6A

F156.6

F156.6A

F170

F200

G140

G170

G200

RG100

RG140.B

RG170.B

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare