Start › Motor graders › New Holland › G200

New Holland G200

Series: New Holland Motor Grader

Source: https://www.tractordata.com/farm-tractors/005/4/8/5480-new-h

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland G200 belongs to the New Holland Motor Grader series. The engine delivers 207.8 hp, has 6 cylinders, with a displacement of 6,702.3 cm³. Rated speed is 2,200 rpm. The wheelbase measures 6,221 mm. Ground clearance is 640.1 mm. The tank holds 340.7 litres. Maximum torque is reached at 1,600 rpm. The hydraulic tank holds 179.8 litres. Working pressure is 179.3 bar. The cooling system holds 39.7 litres. The electrical system runs on 24 V. The engine fitted is the QSB 6,7L. Tyre size: 14,00x24 10 Ply G2. The New Holland Motor Grader series covers 15 models. Rated output within it ranges from 77.1 to 207.8 hp; the G200 sits at the top of that range with 207.8 hp. Its immediate neighbours are the RG200.B below it with 202.8 hp. 502 New Holland models across 32 series are on record. The model is listed under Motor graders. 17 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSB 6.7Lcorrect
Power207.8 hpcorrect
Rated speed2,200 rpmcorrect
Speed at max. torque1,600 rpmcorrect
Cylinders6correct
Displacement6,702.3 cm³correct
Aspirationturbochargedcorrect
Coolant capacity39.7 lcorrect

Dimensions and weights

Length8,555.7correct
Wheelbase6,221correct
Ground clearance640.1correct

Drivetrain and chassis

Gearbox typeFull power shift direct drivecorrect
Tyre size14.00x24 10 Ply G2correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity179.8 lcorrect
Hydraulic pressure179.3correct
Fuel tank capacity340.7 lcorrect

Frequently asked questions

How much power does the New Holland G200 have?

The New Holland G200 delivers 208 hp.

What engine does the New Holland G200 have?

6 cylinders, 6,702 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

F106.6

F106.6A

F140

F156.6

F156.6A

F170

F200

G140

G170

RG100

RG140.B

RG170.B

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare