Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Mft › Eicher 780 AST

Mft Eicher 780 AST

Built: 1991–1998 · Series: 700er-Reihe

More machines from model year 1991

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mft Eicher 780 AST belongs to the 700er-Reihe series. Production: 1991–1998. The engine delivers 80 hp (59 kW), has 4 cylinders, with a displacement of 3,927 cm³. Rated speed is 2,100 rpm. The machine is 3,555 mm long, 1,341 mm wide and 2,270 mm high. The unladen weight is 2,825 kg. The wheelbase measures 2,275 mm. Ground clearance is 390 mm. Top speed is 40 km/h. Transmission: 14V/12R. The engine is air-cooled. Tyres: front 12.5-18, rear 14.9-30. The fuel is diesel. The 700er-Reihe series covers 4 models. Rated output within it ranges from 46 to 80 hp; the Eicher 780 AST sits at the top of that range with 80 hp. Its immediate neighbours are the Eicher 766 AS below it with 66 hp. Unladen weight within it ranges from 1,985 to 2,825 kg; here the Eicher 780 AST sits at the top of that range with 2,825 kg. 9 Mft models across 3 series are on record.

MFT 700 series – register collective page for Eicher tractors 756 to 780: three- to four-cylinder diesels, 2,925 to 3,927 cm3 displacement, 34 to 59 kW, AS, AST and UAC variants

The MFT 700 series gathers in the register four further Eicher tractors, the 756, 766, 780 and 3776 types. The additional letters AS, AST and UAC mark separate equipment and transmission variants of these models, which form a separate section of Eicher's type programme and were built across several production years with minor detail changes.

Read on 3 more paragraphs

The register lists here four versions with 34 to 59 kW from three- to four-cylinder engines of 2,925 to 3,927 cm3 displacement. Unladen weight ranges from 1,985 to 2,825 kg, overall length from 2,900 to 3,555 mm, width from 1,250 to 1,341 mm and height from 1,750 to 2,270 mm. Rated speed sits at 2,100 rpm.

With a power span reaching down to 34 kW, the 700 series covered the lower power segment for smaller mixed farms needing an agile, economical tractor for fieldwork, yard duties, light trailer work and driving yard equipment from the PTO.

On these smaller Eicher models, what counts is rust on the frame and sheet metal, the condition of the brakes and steering, the tightness of the hydraulics and lift linkage, and the function of the electrics and lighting. The comparatively compact build makes these models popular for front-loader work on smaller farms; spare parts are supplied by specialist Eicher vintage-tractor dealers and tractor clubs, who also exchange knowledge on setting values.

Sources: SpecCodex register, model data: MFT 700er-Reihe

Technical data

Engine

Fueldieselcorrect
Power80 hp (59 kW)correct
Rated speed2,100 rpmcorrect
Cylinders4correct
Displacement3,927 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length3,555 mmcorrect
Width1,341 mmcorrect
Height2,270 mmcorrect
Wheelbase2,275 mmcorrect
Ground clearance390 mmcorrect
Unladen weight2,825 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox14V/12Rcorrect
Front tyres12.5-18correct
Rear tyres14.9-30correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 20.9 kW/t (59 kW / 2.8 t)

Power class: Universal (40–100 hp)

Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mft Eicher 780 AST have?

The Mft Eicher 780 AST delivers 80 hp.

How much does the Mft Eicher 780 AST weigh?

The unladen weight is 2,825 kg.

What engine does the Mft Eicher 780 AST have?

4 cylinders, 3,927 cm³ displacement, Diesel.

How fast does the Mft Eicher 780 AST go?

Top speed is 40 km/h.

What are the dimensions of the Mft Eicher 780 AST?

3,555 mm × 1,341 mm × 2,270 mm.

When was the Mft Eicher 780 AST built?

Production years: 1991–1998.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare