Mft Eicher 3776 UAC
Series: 700er-Reihe
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MFT 700 series – register collective page for Eicher tractors 756 to 780: three- to four-cylinder diesels, 2,925 to 3,927 cm3 displacement, 34 to 59 kW, AS, AST and UAC variants
The MFT 700 series gathers in the register four further Eicher tractors, the 756, 766, 780 and 3776 types. The additional letters AS, AST and UAC mark separate equipment and transmission variants of these models, which form a separate section of Eicher's type programme and were built across several production years with minor detail changes.
Read on 3 more paragraphs
The register lists here four versions with 34 to 59 kW from three- to four-cylinder engines of 2,925 to 3,927 cm3 displacement. Unladen weight ranges from 1,985 to 2,825 kg, overall length from 2,900 to 3,555 mm, width from 1,250 to 1,341 mm and height from 1,750 to 2,270 mm. Rated speed sits at 2,100 rpm.
With a power span reaching down to 34 kW, the 700 series covered the lower power segment for smaller mixed farms needing an agile, economical tractor for fieldwork, yard duties, light trailer work and driving yard equipment from the PTO.
On these smaller Eicher models, what counts is rust on the frame and sheet metal, the condition of the brakes and steering, the tightness of the hydraulics and lift linkage, and the function of the electrics and lighting. The comparatively compact build makes these models popular for front-loader work on smaller farms; spare parts are supplied by specialist Eicher vintage-tractor dealers and tractor clubs, who also exchange knowledge on setting values.
Sources: SpecCodex register, model data: MFT 700er-Reihe
Technical data
Engine
| Power | 46 hp (34 kW)correct |
|---|---|
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,925 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 2,900 mmcorrect |
|---|---|
| Width | 1,250 mmcorrect |
| Height | 1,750 mmcorrect |
| Wheelbase | 2,020 mmcorrect |
| Ground clearance | 150 mmcorrect |
| Unladen weight | 1,985 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12 vorwärts, 12 rückwärtscorrect |
| Front tyres | 23.0x8.50-12correct |
| Rear tyres | 7.50-18correct |
| Top speed | 22 km/hcorrect |
Where this model stands
Power-to-weight ratio: 17.1 kW/t (34 kW / 2 t)
Power class: Universal (40–100 hp)
Stronger than 30% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mft Eicher 3776 UAC have?
The Mft Eicher 3776 UAC delivers 46 hp.
How much does the Mft Eicher 3776 UAC weigh?
The unladen weight is 1,985 kg.
What engine does the Mft Eicher 3776 UAC have?
3 cylinders, 2,925 cm³ displacement.
How fast does the Mft Eicher 3776 UAC go?
Top speed is 22 km/h.
What are the dimensions of the Mft Eicher 3776 UAC?
2,900 mm × 1,250 mm × 1,750 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.