Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mercedes Benz › 115CDI 4x4

Mercedes Benz 115CDI 4x4

Built: 2010 · Series: Vito

More machines from model year 2010

The photo shows the Kasten 111CDI A3 A - 3,2T from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/mercedes-benz-vito-ka

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 115CDI 4x4 from Mercedes Benz is part of the Vito series. Production: 2010. The engine delivers 110 kW, has 4 cylinders, with a displacement of 2,148 cm³. The machine is 4,748 mm long and 1,906 mm wide. The unladen weight is 1,950 kg. The gross vehicle weight is 2,770 kg. The Vito series covers 203 models. Rated output within it ranges from 60 to 190 kW; the 115CDI 4x4 sits in the lower part of that range with 110 kW. Its immediate neighbours are the 4x4 CDI 639601 below it with 100 kW and the VITO 116 CDI above it with 120 kW. Unladen weight within it ranges from 1,721 to 2,825 kg; here the 115CDI 4x4 sits in the lower part of that range with 1,950 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Vito – mid-size van since 1996: W638, W639 and W447 generations, CDI diesels with four to six cylinders, 1.6 to 3.7 litres displacement, panel van, Mixto and Tourer versions

The Vito arrived in 1996 as the W638 and has since formed the mid-size van segment of Mercedes-Benz Vans together with the passenger-oriented V-Class, built at the Spanish plant in Vitoria-Gasteiz. The first generation was followed by the W639 in 2003 and the current W447 in 2014, based on a shared platform with the Renault Trafic from Daimler's cooperation with the Renault-Nissan Alliance. The CDI designation denotes common-rail diesel technology; the Vito is offered as a pure panel van, as a Mixto with extra seats, and as a Tourer/combi for passenger transport, with rear- or all-wheel drive as an option.

Read on 3 more paragraphs

The register lists 203 versions with power outputs from 60 to 190 kW, displacements from 1,598 to 3,724 cm³ and four to six cylinders – the latter referring to the V6 CDI top engine of the second generation. Unladen weights range from 1,720 to 2,825 kg, permissible gross weights from 2,500 to 3,500 kg, lengths from 4,660 to 5,370 mm at widths between 1,770 and 2,240 mm.

As a tradesman's and fleet vehicle, the Vito competes with the VW Transporter, the Ford Transit Custom and the Renault Trafic, and is increasingly used as a base for taxis and shuttle vans.

On used examples, check the engine's mileage with regard to the timing chain or timing belt depending on the generation, rust on the sliding door tracks and underbody, the rear axle's slide bearings on rear-wheel-drive versions, the electronics of the driver-assistance systems on the W447, and the turbocharger's service history; spare parts are readily available through the dense Mercedes-Benz Vans network.

Sources: SpecCodex register, model data: Mercedes-Benz Vito, Mercedes-Benz Vans (Mercedes-Benz Group, Hersteller)

Technical data

Engine

Power110 kWcorrect
Cylinders4correct
Displacement2,148 cm³correct

Dimensions and weights

Length4,748 mmcorrect
Width1,906 mmcorrect
Unladen weight1,950 kgcorrect
Gross vehicle weight2,770 kgcorrect

Where this model stands

Power-to-weight ratio: 56.4 kW/t (110 kW / 1.9 t)

Stronger than 75% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 115CDI 4x4 have?

The Mercedes Benz 115CDI 4x4 delivers 110 kW.

How much does the Mercedes Benz 115CDI 4x4 weigh?

The unladen weight is 1,950 kg.

What is the gross vehicle weight of the Mercedes Benz 115CDI 4x4?

2,770 kg.

What engine does the Mercedes Benz 115CDI 4x4 have?

4 cylinders, 2,148 cm³ displacement.

What are the dimensions of the Mercedes Benz 115CDI 4x4?

4,748 mm × 1,906 mm.

When was the Mercedes Benz 115CDI 4x4 built?

Production years: 2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare