Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Atego › 1024L/36

Mercedes Benz 1024L/36

Built: 2011 · Series: Atego

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 1024L/36 from Mercedes Benz is part of the Atego series. Production: 2011. The engine delivers 175 kW, with a displacement of 6,370 cm³. The vehicle is 6,000 mm long and 2,550 mm wide. The unladen weight is 5,900 kg. The gross vehicle weight is 10,500 kg. The Atego series covers 293 models. Rated output within it ranges from 90 to 220 kW; the 1024L/36 sits in the upper part of that range with 175 kW. Its immediate neighbours are the 823L below it with 170 kW and the 1225 AF-97635 4X4/386 above it with 180 kW. Unladen weight within it ranges from 4,250 to 16,554 kg; here the 1024L/36 sits at the bottom of that range with 5,900 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Atego – distribution truck since 1998 between 6.5 and 26 tonnes: type number built from weight class and horsepower, four-cylinder OM904 and six-cylinder OM906 engines, 90 to 220 kW

The Atego arrived in 1998 as the mid-range series between the light Vario and the heavy Actros, and has since covered the distribution and municipal-vehicle class from roughly 6.5 to 26 tonnes; facelifts followed in 2004 and 2013 with new cabs and emission stages. The four-digit type number follows Mercedes' factory standard: the first one or two digits give the weight class in tonnes, the last two roughly the output in horsepower divided by ten – a 1224 stands for about 12 t and roughly 240 hp. L marks, under factory naming, the standard chassis, AF four-wheel drive, NR a special-equipment version; the number after the slash (e.g. /42 or /4760) refers to wheelbase or frame length.

Read on 3 more paragraphs

The register lists 293 versions with 90 to 220 kW output, displacements of 4,200 to 7,698 cm³ (four-cylinder OM904 and six-cylinder OM906) across 4 to 6 cylinders, unladen weights of 4,250 to 16,554 kg, gross weights of 6,500 to 26,500 kg and lengths of 5,750 to 11,970 mm.

The Atego is the classic distribution truck for city logistics, refrigerated transport, furniture and beverage delivery, and fire-service and municipal bodies; it competes with the MAN TGL/TGM, DAF LF, Volvo FL/FE and Iveco Eurocargo.

On used examples, check rust on the frame and body mounting points, condition of clutch and gearbox (Telligent shift on later models), brake system and ABS/ASR, sealing of the cab mounts, and operating hours on municipal and refrigerated bodies, which often run well ahead of pure mileage.

Sources: SpecCodex register, model data: Mercedes-Benz Atego, Mercedes-Benz Trucks (manufacturer)

Technical data

Engine

Power175 kWcorrect
Displacement6,370 cm³correct

Dimensions and weights

Length6,000 mmcorrect
Width2,550 mmcorrect
Unladen weight5,900 kgcorrect
Gross vehicle weight10,500 kgcorrect

Where this model stands

Power-to-weight ratio: 29.7 kW/t (175 kW / 5.9 t)

Stronger than 24% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 1024L/36 have?

The Mercedes Benz 1024L/36 delivers 175 kW.

How much does the Mercedes Benz 1024L/36 weigh?

The unladen weight is 5,900 kg.

What is the gross vehicle weight of the Mercedes Benz 1024L/36?

10,500 kg.

What engine does the Mercedes Benz 1024L/36 have?

6,370 cm³ displacement.

What are the dimensions of the Mercedes Benz 1024L/36?

6,000 mm × 2,550 mm.

When was the Mercedes Benz 1024L/36 built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare