Technical register for agricultural, construction and commercial machinery · sourced data

Mercedes Benz 1022L

Built: 2008-2008 · Series: Atego

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz 1022L is a model in the Atego series. Production: 2008. The engine delivers 160 kW, has 4 cylinders, with a displacement of 4,800 cm³. The machine is 8,350 mm long and 2,550 mm wide. The unladen weight is 6,300 kg. The gross vehicle weight is 10,500 kg. The Atego series covers 151 models. Rated output within it ranges from 110 to 220 kW; the 1022L sits in the middle of that range with 160 kW. Its immediate neighbours are the 1221L below it with 155 kW and the 1023 97024-4X2/482 above it with 170 kW. 6445 Mercedes Benz models across 57 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Mercedes-Benz Atego – distribution truck since 1998 between 6.5 and 26 tonnes: type number built from weight class and horsepower, four-cylinder OM904 and six-cylinder OM906 engines, 90 to 220 kW

The Atego arrived in 1998 as the mid-range series between the light Vario and the heavy Actros, and has since covered the distribution and municipal-vehicle class from roughly 6.5 to 26 tonnes; facelifts followed in 2004 and 2013 with new cabs and emission stages. The four-digit type number follows Mercedes' factory standard: the first one or two digits give the weight class in tonnes, the last two roughly the output in horsepower divided by ten – a 1224 stands for about 12 t and roughly 240 hp. L marks, under factory naming, the standard chassis, AF four-wheel drive, NR a special-equipment version; the number after the slash (e.g. /42 or /4760) refers to wheelbase or frame length.

Read on 3 more paragraphs

The register lists 293 versions with 90 to 220 kW output, displacements of 4,200 to 7,698 cm³ (four-cylinder OM904 and six-cylinder OM906) across 4 to 6 cylinders, unladen weights of 4,250 to 16,554 kg, gross weights of 6,500 to 26,500 kg and lengths of 5,750 to 11,970 mm.

The Atego is the classic distribution truck for city logistics, refrigerated transport, furniture and beverage delivery, and fire-service and municipal bodies; it competes with the MAN TGL/TGM, DAF LF, Volvo FL/FE and Iveco Eurocargo.

On used examples, check rust on the frame and body mounting points, condition of clutch and gearbox (Telligent shift on later models), brake system and ABS/ASR, sealing of the cab mounts, and operating hours on municipal and refrigerated bodies, which often run well ahead of pure mileage.

Sources: Kennwerte der Modelle Mercedes-Benz Atego, Mercedes-Benz Trucks (Hersteller)

Technical data

Engine

Power160 kWcorrect
Cylinders4correct
Displacement4,800 cm³correct

Dimensions and weights

Length8,350 mmcorrect
Width2,550 mmcorrect
Unladen weight6,300 kgcorrect
Gross vehicle weight10,500 kgcorrect

Where this model stands

Power-to-weight ratio: 25.4 kW/t (160 kW / 6.3 t)

Stronger than 20% of the trucks over 7.5 t in the register — out of 25,425 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 1022L have?

The Mercedes Benz 1022L delivers 160 kW.

How much does the Mercedes Benz 1022L weigh?

The unladen weight is 6,300 kg.

What is the gross vehicle weight of the Mercedes Benz 1022L?

10,500 kg.

What engine does the Mercedes Benz 1022L have?

4 cylinders, 4,800 cm³ displacement.

What are the dimensions of the Mercedes Benz 1022L?

8,350 mm × 2,550 mm.

When was the Mercedes Benz 1022L built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare