McCormick D-217 STANDARD – specifications
Built: 11/1956–4/1962 · Series: D-Serie
With the D-217 STANDARD, McCormick offers a model from the D series. Production: 11/1956–4/1962. The engine delivers 17 hp (12.5 kW), has 2 cylinders, with a displacement of 1,217 cm³. Rated speed is 1,900 rpm. The machine is 2,672 mm long, 1,581 mm wide and 1,397 mm high. The unladen weight is 1,185 kg. The wheelbase measures 1,730 mm. Ground clearance is 354 mm. Top speed is 18 km/h. Transmission: 6 V/1 R. The engine is water-cooled. Tyres: front 4.50-16 AS, rear 8-24 AS. The fuel is diesel. The bore measures 87.3 mm. The stroke is 101.6 mm. Construction: frameless unit construction. The gearbox offers 6 forward gears. There are also 1 reverse gears. Injection pressure is 150 bar. The linkage is category I. Around 4.738 units were built. The D-Serie series covers 5 models. Rated output within it ranges from 17 to 24.5 hp; the D-217 STANDARD sits at the bottom of that range with 17 hp. Its immediate neighbours are the D-320 Farmall above it with 20 hp. Unladen weight within it ranges from 1,065 to 1,536 kg; here the D-217 STANDARD sits in the lower part of that range with 1,185 kg. 381 McCormick models across 40 series are on record.
Data for the version built 11/1956–4/1962 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1956
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
McCormick D series – five tractors from the IH plant in Neuss from the 1950s, the D 217 Farmall to the D-326, two- and three-cylinder engines of 12.5 to 18 kW, 1,065 to 1,536 kg unladen weight
The McCormick D series was built in the 1950s at the International Harvester plant in Neuss and comprised both standard tractors and narrow-tread Farmall versions for row-crop work; the register lists here the D 217 Farmall, the D-217 Standard, the D-320 Farmall as well as the D-324 and D-326. The number in the type designation names the model size, the Farmall suffix the narrow build for row crops.
Read on 3 more paragraphs
The register lists here five versions with 12.5 to 18 kW, or 17 to 24.5 hp, from two- or three-cylinder engines of 1,217 to 1,825 cm³ displacement, torque from 86 to 99 Nm, unladen weights from 1,065 to 1,536 kg, lengths from 2,570 to 2,750 mm, widths from 1,581 to 1,640 mm and heights from 1,397 to 1,560 mm at a rated speed of 1,900 rpm.
As compact diesel tractors for smaller and medium farms, the D series competed with the small tractors from Deutz, Fendt and Eicher on the German and European market, marking the shift of many farms from horse teams to diesel tractors.
When buying used, the condition of the injection pump and cooling system, wear on clutch and gearbox and corrosion on sheet-metal parts and wings matter; spare parts for the Neuss-built IH engines are available through dealers specialising in historic farm machinery. On the older standard versions, steering geometry and the condition of the front axle also deserve attention.
Sources: SpecCodex register, model data: McCormick D-Serie
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 17 hp (12.5 kW)correct |
| Rated speed | 1,900 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 1,217 cm³correct |
| Bore | 87.3 mmcorrect |
| Stroke | 101.6 mmcorrect |
| Injection pressure | 150 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,672 mmcorrect |
|---|---|
| Width | 1,581 mmcorrect |
| Height | 1,397 mmcorrect |
| Wheelbase | 1,730 mmcorrect |
| Ground clearance | 354 mmcorrect |
| Unladen weight | 1,185 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 6 V/1 Rcorrect |
| Forward gears | 6correct |
| Reverse gears | 1correct |
| Front tyres | 4.50-16 AScorrect |
| Rear tyres | 8-24 AScorrect |
| Top speed | 18 km/hcorrect |
Origin and approval
| Construction | frameless unit constructioncorrect |
|---|---|
| Units built | 4,738correct |
Other data
| Linkage category | Cat Icorrect |
|---|
Frequently asked questions
Where this model stands
Power-to-weight ratio: 10.5 kW/t (12 kW / 1.2 t)
Power class: Compact (< 40 hp)
Stronger than 5% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.