Technical register for agricultural, construction and commercial machinery · sourced data

Maschinenfabrik Bungartz & Co L5

Built: 1954–1967 · Series: L

More machines from model year 1954

Source: vmasshtabe.ru

The Maschinenfabrik Bungartz & Co L5 is a tractor from the L series, built in 1954–1967. The single-cylinder engine produces 12 hp (9 kW).

Power is transmitted through a 7/3-Schaltgetriebe gearbox, drive type: single-axle. It runs on diesel; the engine is air-cooled.

Technical data

Engine

Fueldieselcorrect
Power12 hp (9 kW)correct
Cylinders1correct
Coolingair-cooledcorrect

Drivetrain and chassis

Drivesingle-axle drivecorrect
Gearbox7/3-manual gearbox gearboxcorrect
Rear tyres6, 50X20 AScorrect

Origin and approval

Constructionframeless unit constructioncorrect

Frequently asked questions

How much power does the Maschinenfabrik Bungartz & Co L5 have?

The Maschinenfabrik Bungartz & Co L5 delivers 12 hp.

What engine does the Maschinenfabrik Bungartz & Co L5 have?

1 cylinders, Diesel.

When was the Maschinenfabrik Bungartz & Co L5 built?

Production years: 1954–1967.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare