MAN TGE 5.160
Built: 2024 · Series: TGE
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MAN TGE – van series: based on the VW Crafter, 2.0-litre four-cylinder engine at 130 kW, variants from TGE 3.180 to TGE 5.180 plus 4x4 versions, gross weights from 3.5 to 4 tonnes
The MAN TGE has been MAN's answer in the van segment since 2017, built on the VW Crafter platform, with which it shares engines and body dimensions; it is manufactured at MAN's plant in Września, Poland. The naming logic follows the VW scheme: the first digit denotes the payload class, the following number the engine output in horsepower divided by ten, so the TGE 3.180 is the 3.0-tonne class with around 180 hp and the TGE 5.180 the 5.0-tonne class with the same output; L3H2 and L3H3 denote wheelbase and roof-height combinations, and SB refers to four-wheel-drive chassis.
Read on 3 more paragraphs
The register lists 9 variants here, all at 130 kW from four-cylinder engines displacing 1,968 cm³, kerb weights from 2,397 to 3,140 kg and gross weights from 3,500 to 4,000 kg. Lengths range from 5,760 to around 7,114 mm, widths from 2,040 to 2,100 mm.
The TGE competes against the Mercedes Sprinter, Ford Transit and its twin the VW Crafter, and in fleet business it benefits from the MAN service network already used by haulage firms running the brand's trucks.
When buying used, check the condition of the two-litre turbodiesel and its exhaust after-treatment, the mileage on the dual-clutch gearbox on suitably equipped vans, and, on the 4x4 variants, the transfer-case components; spare parts run through either MAN or VW commercial-vehicle dealers.
Sources: SpecCodex register, model data: MAN TGE, MAN Truck & Bus (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 5,760 mmcorrect |
|---|---|
| Width | 2,050 mmcorrect |
| Wheelbase | 3,800 mmcorrect |
| Unladen weight | 2,647 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the MAN TGE 5.160 weigh?
The unladen weight is 2,647 kg.
What is the gross vehicle weight of the MAN TGE 5.160?
3,500 kg.
What engine does the MAN TGE 5.160 have?
4 cylinders, 1,968 cm³ displacement.
How fast does the MAN TGE 5.160 go?
Top speed is 90 km/h.
What are the dimensions of the MAN TGE 5.160?
5,760 mm × 2,050 mm.
When was the MAN TGE 5.160 built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
4 current listings for MAN TGE 5.160 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
