MAN 18.232 FA-4X4/390
Built: 1993 · Series: 18.232
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MAN 18.232 FA-4X4/390 is a truck of the MAN 18.232 type series, built in 1993. The engine delivers 169 kW from a displacement of 6,870 cm³. The vehicle measures 6,970 mm in length and 2,600 mm in width. Kerb weight is 12,400 kg, gross vehicle weight is 18,000 kg. The gearbox has 8 gears.
The type number follows the MAN scheme: the figure before the point is the weight class in tonnes, the figure after it the nominal output in PS. The 18.232 covers the 18-tonne class with the displacement of 6,870 cm³ that appears in many MAN types of the 1990s; cab and wheelbase variants differ clearly in length and kerb weight. Types with the 4X4 suffix are all-wheel-drive chassis for off-road and special-purpose vehicles.
MAN 18.232 – trucks of the 18-tonne class: inline six-cylinder with about 169 kW, cab variants F, FA and FL, gross weights from 17,000 to 18,300 kg, 9 versions in the register
The MAN 18.232 follows the same type logic as the smaller MAN ranges of the 1980s and 1990s: the first number gives the 18-tonne weight class, the number after the point the engine output of about 232 hp. The cab suffixes F, FA and FL mark cab variants, BL a sleeper version for long-haul work, FLS a further cab version; FA models with the 4X4 suffix are all-wheel-drive versions.
Read on 3 more paragraphs
The register lists nine versions with about 169 kW from six-cylinders of 6.7 to 6.9 litres, unladen weights from 5,180 to 12,400 kg, gross weights from 17,000 to 18,300 kg, lengths from 5,600 to 10,630 mm and widths from 2,500 to 2,600 mm, depending on the bodywork fitted.
The 18-tonne class is among the classic two-axle trucks of medium-heavy distribution and construction-site traffic and was bodied from dropsides and box bodies to tipper and concrete-mixer chassis; the 4X4 versions served construction-site and off-road use, while the BL sleeper cabs were also laid out for longer long-haul runs.
On used examples, operating hours and the condition of the injection pump and turbocharger matter, along with clutch and gearbox, on the all-wheel-drive versions the transfer case and axles, rust on the frame and cab, and brakes and suspension under full load; parts run through the dense MAN dealer and parts network.
Sources: SpecCodex register, model data: MAN 18.232, MAN Truck & Bus (manufacturer)
Technical data
Engine
| Power | 169 kWcorrect |
|---|---|
| Displacement | 6,870 cm³correct |
Dimensions and weights
| Length | 6,970 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 12,400 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Gears | 8correct |
|---|
Where this model stands
Power-to-weight ratio: 13.6 kW/t (169 kW / 12.4 t)
Stronger than 22% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the MAN 18.232 FA-4X4/390 have?
The MAN 18.232 FA-4X4/390 delivers 169 kW.
How much does the MAN 18.232 FA-4X4/390 weigh?
The unladen weight is 12,400 kg.
What is the gross vehicle weight of the MAN 18.232 FA-4X4/390?
18,000 kg.
What engine does the MAN 18.232 FA-4X4/390 have?
6,870 cm³ displacement.
What are the dimensions of the MAN 18.232 FA-4X4/390?
6,970 mm × 2,600 mm.
When was the MAN 18.232 FA-4X4/390 built?
Production years: 1993.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
18.232 F
18.232 F/450
18.232 FA
18.232 FL-55/470
18.232 FL-BL/415
18.232 FL-BL/550
18.232 FL/BL
18.232 FLS/BL
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.