MAN 18.232 FL/BL
Built: 1989-1995 · Series: 18.232
More machines from model year 1989
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MAN 18.232 – trucks of the 18-tonne class: inline six-cylinder with about 169 kW, cab variants F, FA and FL, gross weights from 17,000 to 18,300 kg, 9 versions in the register
The MAN 18.232 follows the same type logic as the smaller MAN ranges of the 1980s and 1990s: the first number gives the 18-tonne weight class, the number after the point the engine output of about 232 hp. The cab suffixes F, FA and FL mark cab variants, BL a sleeper version for long-haul work, FLS a further cab version; FA models with the 4X4 suffix are all-wheel-drive versions.
Read on 3 more paragraphs
The register lists nine versions with about 169 kW from six-cylinders of 6.7 to 6.9 litres, unladen weights from 5,180 to 12,400 kg, gross weights from 17,000 to 18,300 kg, lengths from 5,600 to 10,630 mm and widths from 2,500 to 2,600 mm, depending on the bodywork fitted.
The 18-tonne class is among the classic two-axle trucks of medium-heavy distribution and construction-site traffic and was bodied from dropsides and box bodies to tipper and concrete-mixer chassis; the 4X4 versions served construction-site and off-road use, while the BL sleeper cabs were also laid out for longer long-haul runs.
On used examples, operating hours and the condition of the injection pump and turbocharger matter, along with clutch and gearbox, on the all-wheel-drive versions the transfer case and axles, rust on the frame and cab, and brakes and suspension under full load; parts run through the dense MAN dealer and parts network.
Sources: Kennwerte der Modelle MAN 18.232, MAN Truck & Bus (Hersteller)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Length | 10,630 mmcorrect |
|---|---|
| Width | 2,570 mmcorrect |
| Wheelbase | 6,300 mmcorrect |
| Unladen weight | 11,000 kgcorrect |
| Gross vehicle weight | 18,200 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the MAN 18.232 FL/BL weigh?
The unladen weight is 11,000 kg.
What is the gross vehicle weight of the MAN 18.232 FL/BL?
18,200 kg.
What engine does the MAN 18.232 FL/BL have?
6 cylinders.
What are the dimensions of the MAN 18.232 FL/BL?
10,630 mm × 2,570 mm.
When was the MAN 18.232 FL/BL built?
Production years: 1989-1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
18.232 F
18.232 F/450
18.232 FA
18.232 FA-4X4/390
18.232 FL-55/470
18.232 FL-BL/415
18.232 FL-BL/550
18.232 FLS/BL
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.