StartTractorsLS › I3040

LS I3040

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The LS I3040 is a tractor from LS. 29 kW is available.

Drive type: MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 17 to 290 kW; with 29 kW, the I3040 sits in the lower third. Directly alongside are the XR3037H with 28 kW below and the R4041 EZ with 31 kW above.

Technical data

Engine

Engine makeMitsubishicorrect
Fueldieselcorrect
Power39 hp (29 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantSouth Koreacorrect

Frequently asked questions

How much power does the LS I3040 have?

The LS I3040 delivers 39 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare