Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Lindner › BF 16

Lindner BF 16

Built: 1963–1966 · Series: BF - Reihe

More machines from model year 1963

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The BF - Reihe series from Lindner includes the BF 16. Production: 1963–1966. The engine delivers 16 hp, has 2 cylinders, with a displacement of 1,274 cm³. Rated speed is 2,400 rpm. The unladen weight is 952 kg. The wheelbase measures 1,710 mm. Transmission: 6V / 2R. The engine is air-cooled. Tyres: front 4,00-15 oder 4,50-15, rear 8-24. The fuel is diesel. Construction: unit construction (no separate frame). The gearbox offers 6 forward gears. There are also 2 reverse gears. The BF - Reihe series covers 8 models. Rated output within it ranges from 14 to 45 hp; the BF 16 sits at the bottom of that range with 16 hp. Its immediate neighbours are the BF 14 below it with 14 hp and the BF 22 N / A above it with 22 hp. Unladen weight within it ranges from 952 to 1,800 kg; here the BF 16 sits at the bottom of that range with 952 kg. 48 Lindner models across 18 series are on record.

Lindner BF series (1948 to 1960s) – the Bauernfreund from Kundl in Tyrol: BF 14 to BF 45, the number as hp class, N and A for standard and four-wheel-drive versions, two- and three-cylinder diesels of 1.0 to 2.5 litres

Lindner of Kundl in the Tyrolean Inn valley built its first tractor in 1948 and called it Bauernfreund – farmer's friend, BF – a name that became the programme: small, light tractors for the mountain farmers of Tyrol, Vorarlberg and South Tyrol, working on steep meadows and tight farmsteads where the tractors of the big makers are too heavy and too wide. The type logic: BF marks the range, the number the hp class – BF 14 about 14 hp, BF 22 22 hp, BF 30 30 hp, BF 45 about 45 hp – N the standard version with rear-wheel drive, A the four-wheel-drive version Lindner offered early because it is indispensable on slopes; GT on the BF 320 and a on the BF 45a are equipment and generation suffixes. The engines are bought-in two- and three-cylinder diesels of 1.0 to 2.5 litres at 2,400 to 2,800 rpm.

Read on 3 more paragraphs

The register lists 8 versions with 14 to 32 hp from two- and three-cylinders of 1,000 to 2,502 cm³, unladen weights from 952 to 1,800 kg, lengths from 2,405 to 3,400 mm, widths from 1,460 to 1,760 mm and heights from 1,370 to 1,470 mm.

The BF range laid the foundation for Lindner's role as mountain-tractor specialist, which the family continues in Kundl today with the Geotrac, Lintrac and Unitrac ranges; the Bauernfreunds are collectors' pieces in Tyrol with their own scene.

On used tractors, originality, engine condition (parts depend on the engine supplier), clutch, gearbox and four-wheel-drive clutch on A models, brakes (decisive on slopes), hydraulics and sheet metal count; parts run through Lindner and vintage specialists.

Sources: SpecCodex register, model data: Lindner BF-Reihe, Lindner Traktorenwerk (Hersteller, Kundl)

Technical data

Engine

Fueldieselcorrect
Power16 hpcorrect
Power16 hpcorrect
Rated speed2,400 rpmcorrect
Cylinders2correct
Displacement1,274 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Wheelbase1,710 mmcorrect
Unladen weight952 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox6V / 2Rcorrect
Forward gears6correct
Reverse gears2correct
Front tyres4, 00-15 oder 4, 50-15correct
Rear tyres8-24correct

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 12.4 kW/t (12 kW / 1 t)

Power class: Compact (< 40 hp)

Stronger than 4% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lindner BF 16 have?

The Lindner BF 16 delivers 16 hp.

How much does the Lindner BF 16 weigh?

The unladen weight is 952 kg.

What engine does the Lindner BF 16 have?

2 cylinders, 1,274 cm³ displacement, Diesel.

When was the Lindner BF 16 built?

Production years: 1963–1966.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare