Lindner BF 45a
Built: 1963–1967 · Series: BF - Reihe
More machines from model year 1963
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lindner BF series (1948 to 1960s) – the Bauernfreund from Kundl in Tyrol: BF 14 to BF 45, the number as hp class, N and A for standard and four-wheel-drive versions, two- and three-cylinder diesels of 1.0 to 2.5 litres
Lindner of Kundl in the Tyrolean Inn valley built its first tractor in 1948 and called it Bauernfreund – farmer's friend, BF – a name that became the programme: small, light tractors for the mountain farmers of Tyrol, Vorarlberg and South Tyrol, working on steep meadows and tight farmsteads where the tractors of the big makers are too heavy and too wide. The type logic: BF marks the range, the number the hp class – BF 14 about 14 hp, BF 22 22 hp, BF 30 30 hp, BF 45 about 45 hp – N the standard version with rear-wheel drive, A the four-wheel-drive version Lindner offered early because it is indispensable on slopes; GT on the BF 320 and a on the BF 45a are equipment and generation suffixes. The engines are bought-in two- and three-cylinder diesels of 1.0 to 2.5 litres at 2,400 to 2,800 rpm.
Read on 3 more paragraphs
The register lists 8 versions with 14 to 32 hp from two- and three-cylinders of 1,000 to 2,502 cm³, unladen weights from 952 to 1,800 kg, lengths from 2,405 to 3,400 mm, widths from 1,460 to 1,760 mm and heights from 1,370 to 1,470 mm.
The BF range laid the foundation for Lindner's role as mountain-tractor specialist, which the family continues in Kundl today with the Geotrac, Lintrac and Unitrac ranges; the Bauernfreunds are collectors' pieces in Tyrol with their own scene.
On used tractors, originality, engine condition (parts depend on the engine supplier), clutch, gearbox and four-wheel-drive clutch on A models, brakes (decisive on slopes), hydraulics and sheet metal count; parts run through Lindner and vintage specialists.
Sources: SpecCodex register, model data: Lindner BF-Reihe, Lindner Traktorenwerk (Hersteller, Kundl)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 45 hpcorrect |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,502 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,400 mmcorrect |
|---|---|
| Width | 1,700 mmcorrect |
| Ground clearance | 390 mmcorrect |
| Unladen weight | 1,800 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | ZF 210IIcorrect |
| Front tyres | 6, 50-20 (später 7, 50-18)correct |
| Rear tyres | 11-28correct |
| Top speed | 26.3 km/hcorrect |
Origin and approval
| Units built | 514correct |
|---|
Where this model stands
Power-to-weight ratio: 18.4 kW/t (33 kW / 1.8 t)
Power class: Universal (40–100 hp)
Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lindner BF 45a have?
The Lindner BF 45a delivers 45 hp.
How much does the Lindner BF 45a weigh?
The unladen weight is 1,800 kg.
What engine does the Lindner BF 45a have?
3 cylinders, 2,502 cm³ displacement, Diesel.
How fast does the Lindner BF 45a go?
Top speed is 26.3 km/h.
What are the dimensions of the Lindner BF 45a?
3,400 mm × 1,700 mm.
When was the Lindner BF 45a built?
Production years: 1963–1967.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.