Lamborghini R-475 (DT)
Built: 1971–1973 · Series: Dritte R-Baureihe
More machines from model year 1971
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini third R range – three- and four-cylinder four-wheel-drive tractors from Pieve di Cento: the R-365, R-475 and R-485 (DT), 45.6 to 61 kW, 2.5 to 3 t unladen weight
The third R range from Lamborghini Trattori of Pieve di Cento continued the R model family with the R-365, R-475 and R-485 types, each in DT form with the brand's typical standard four-wheel drive, Doppia Trazione. The range combined three- and four-cylinder diesels in a mid power segment and was aimed at farms needing sure pulling power even on tougher ground, from hillside grassland to heavier arable soils.
Read on 3 more paragraphs
The register lists here 3 versions with 45.6 to 61 kW output at a uniform 2,000 rpm, from three- to four-cylinder diesels of 3,739 to 4,986 cm³. Unladen weights range from 2,537 to 3,025 kg, lengths from 3,620 to 3,790 mm, widths from 1,680 to 1,750 mm and heights from 1,530 to 1,600 mm; all three models run on diesel.
With standard four-wheel drive, the third R range sat in the mid power segment against similarly equipped models from group sister SAME as well as Fiat, Deutz-Fahr and Renault; the four-wheel drive made the tractors particularly suited to slopes and heavier soils.
On a used purchase of these four-wheel-drive tractors, the condition of the front axle with its transfer gearbox and drive shafts counts, the clutch and gearbox, the tightness of injection pump and cooling system, and rust on mudguards, bonnet and cab; parts run through the SAME Deutz-Fahr network.
Sources: SpecCodex register, model data: Lamborghini Dritte R-Baureihe, Lamborghini Trattori (SAME Deutz-Fahr, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 74 hp (54.4 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,561 cm³correct |
| Bore | 110 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17.5correct |
| Injection pressure | 180 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,790 mmcorrect |
|---|---|
| Width | 1,680 mmcorrect |
| Height | 1,600 mmcorrect |
| Wheelbase | 2,260 mmcorrect |
| Unladen weight | 2,742 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/3 Rcorrect |
| Forward gears | 12correct |
| Reverse gears | 3correct |
| Front tyres | 7.50-16 ASF (DT: 9.5-24 AS)correct |
| Rear tyres | 14.9-30 AScorrect |
| Top speed | 25 km/hcorrect |
Working data
| Fuel tank capacity | 65 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 34 (DT: 73)correct |
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 19.8 kW/t (54 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini R-475 (DT) have?
The Lamborghini R-475 (DT) delivers 74 hp.
How much does the Lamborghini R-475 (DT) weigh?
The unladen weight is 2,742 kg.
What engine does the Lamborghini R-475 (DT) have?
4 cylinders, 4,561 cm³ displacement, Diesel.
How fast does the Lamborghini R-475 (DT) go?
Top speed is 25 km/h.
What are the dimensions of the Lamborghini R-475 (DT)?
3,790 mm × 1,680 mm × 1,600 mm.
When was the Lamborghini R-475 (DT) built?
Production years: 1971–1973.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.