Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kramer › Export-Reihe › 600 Export

Kramer 600 Export

Built: 4/1967–9/1968 · Series: Export-Reihe

More machines from model year 1967

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kramer 600 Export is a model in the Export-Reihe series. Production: 4/1967–9/1968. The engine delivers 45 hp (32.9 kW), has 4 cylinders, with a displacement of 2,260 cm³. Torque is 137 Nm. Rated speed is 2,500 rpm. The machine is 3,620 mm long, 1,750 mm wide and 1,780 mm high. The unladen weight is 2,450 kg. The wheelbase measures 2,100 mm. Top speed is 24.19 km/h. The tank holds 64 litres. The engine is water-cooled. Tyres: front 7.50-18 ( A: 10.50-18 ), rear 11-36 ( A: 13-28 ). The fuel is diesel. Construction: frameless unit construction. The gearbox offers 12 forward gears. There are also 6 reverse gears. The linkage is category I. Around 75 units were built. The Export-Reihe series covers 5 models. Rated output within it ranges from 32.5 to 45 hp; the 600 Export sits at the top of that range with 45 hp. Its immediate neighbours are the 450 Export below it with 42.5 hp. Unladen weight within it ranges from 1,600 to 2,450 kg; here the 600 Export sits at the top of that range with 2,450 kg. 137 Kramer models across 20 series are on record.

Kramer Export 350 to 600 – the narrow-track tractors from Überlingen for special crops: O as the narrow orchard version, the same 2.3-litre four-cylinder across the range, 24 to 33 kW

Kramer-Werke of Überlingen on Lake Constance, in the decades before its present focus on wheel loaders and telehandlers, also built farm tractors, among them the Export range, offered with a single four-cylinder diesel engine across several chassis widths. What stands out is the extreme spread of widths, from 1,000 to 1,750 mm, with an essentially unchanged engine: the narrowest version, the 350 Export O, at around a metre wide, fits between the rows of orchards and vineyards, which the O in the designation denotes, while the wider Export models ran as standard-width farm and field tractors.

Read on 3 more paragraphs

The register lists 5 versions with an engine of 2,260 cm³, outputs of 23.7 to 32.9 kW, torque of 137 Nm, operating weights of 1,600 to 2,450 kg and heights of 1,200 to 1,780 mm at 2,300 to 2,500 rpm.

The narrow Export range served the niche of special-crop farms where a standard-width tractor cannot turn between the rows, putting it in competition with the narrow-track tractors of Fendt and Same of the period.

On used narrow versions, the condition of steering knuckles and steering, and generally the condition of clutch and gearbox, rust on wings and bonnet, count, along with parts supply, which at Kramer-Werke today runs mainly through the construction-equipment division rather than the old tractors.

Sources: SpecCodex register, model data: Kramer Export-Reihe, Kramer-Werke (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power45 hp (32.9 kW)correct
Rated speed2,500 rpmcorrect
Torque137 Nmcorrect
Cylinders4correct
Displacement2,260 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,620 mmcorrect
Width1,750 mmcorrect
Height1,780 mmcorrect
Wheelbase2,100 mmcorrect
Unladen weight2,450 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox12/6-Getriebecorrect
Forward gears12correct
Reverse gears6correct
Front tyres7.50-18 ( A: 10.50-18 )correct
Rear tyres11-36 ( A: 13-28 )correct
Top speed24.19 km/hcorrect

Working data

Fuel tank capacity64 lcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built75correct

Other data

Linkage categoryCat Icorrect

Where this model stands

Power-to-weight ratio: 13.4 kW/t (33 kW / 2.5 t)

Power class: Universal (40–100 hp)

Stronger than 28% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kramer 600 Export have?

The Kramer 600 Export delivers 45 hp.

How much does the Kramer 600 Export weigh?

The unladen weight is 2,450 kg.

What engine does the Kramer 600 Export have?

4 cylinders, 2,260 cm³ displacement, Diesel.

How fast does the Kramer 600 Export go?

Top speed is 24.2 km/h.

What are the dimensions of the Kramer 600 Export?

3,620 mm × 1,750 mm × 1,780 mm.

When was the Kramer 600 Export built?

Production years: 4/1967–9/1968.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare