Kramer 350 Export H
Built: 1/64–9/68 · Series: Export-Reihe
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kramer Export 350 to 600 – the narrow-track tractors from Überlingen for special crops: O as the narrow orchard version, the same 2.3-litre four-cylinder across the range, 24 to 33 kW
Kramer-Werke of Überlingen on Lake Constance, in the decades before its present focus on wheel loaders and telehandlers, also built farm tractors, among them the Export range, offered with a single four-cylinder diesel engine across several chassis widths. What stands out is the extreme spread of widths, from 1,000 to 1,750 mm, with an essentially unchanged engine: the narrowest version, the 350 Export O, at around a metre wide, fits between the rows of orchards and vineyards, which the O in the designation denotes, while the wider Export models ran as standard-width farm and field tractors.
Read on 3 more paragraphs
The register lists 5 versions with an engine of 2,260 cm³, outputs of 23.7 to 32.9 kW, torque of 137 Nm, operating weights of 1,600 to 2,450 kg and heights of 1,200 to 1,780 mm at 2,300 to 2,500 rpm.
The narrow Export range served the niche of special-crop farms where a standard-width tractor cannot turn between the rows, putting it in competition with the narrow-track tractors of Fendt and Same of the period.
On used narrow versions, the condition of steering knuckles and steering, and generally the condition of clutch and gearbox, rust on wings and bonnet, count, along with parts supply, which at Kramer-Werke today runs mainly through the construction-equipment division rather than the old tractors.
Sources: SpecCodex register, model data: Kramer Export-Reihe, Kramer-Werke (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 32.5 hp (23.7 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,260 cm³correct |
| Bore | 84.14 mmcorrect |
| Stroke | 101.6 mmcorrect |
| Injection pressure | 140 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,245 mmcorrect |
|---|---|
| Width | 1,000 mmcorrect |
| Height | 1,200 mmcorrect |
| Wheelbase | 1,995 mmcorrect |
| Ground clearance | 330 mmcorrect |
| Unladen weight | 1,600 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 10V/2Rcorrect |
| Forward gears | 10correct |
| Reverse gears | 2correct |
| Front tyres | 4.00 x 16 ASFcorrect |
| Rear tyres | 9 x 24 AScorrect |
| Top speed | 19.6 km/hcorrect |
Working data
| Fuel tank capacity | 35 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 205correct |
Where this model stands
Power-to-weight ratio: 14.8 kW/t (24 kW / 1.6 t)
Power class: Compact (< 40 hp)
Stronger than 19% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kramer 350 Export H have?
The Kramer 350 Export H delivers 32.5 hp.
How much does the Kramer 350 Export H weigh?
The unladen weight is 1,600 kg.
What engine does the Kramer 350 Export H have?
4 cylinders, 2,260 cm³ displacement, Diesel.
How fast does the Kramer 350 Export H go?
Top speed is 19.6 km/h.
What are the dimensions of the Kramer 350 Export H?
3,245 mm × 1,000 mm × 1,200 mm.
When was the Kramer 350 Export H built?
Production years: 1/64–9/68.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.