Technical register for agricultural, construction and commercial machinery · sourced data

Kobelco SK260LC-9

Series: Kobelco Hydraulic Excavator

Source: kobelco.co.nz

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kobelco SK260LC-9 is a model in the Kobelco Hydraulic Excavator series. The engine delivers 137.1 kW, has 4 cylinders, with a displacement of 5,124.2 cm³. Torque is 654 Nm. Rated speed is 2,100 rpm. The unladen weight is 56,230 kg. The tank holds 460.3 litres. The hydraulic tank holds 280.1 litres. Working pressure is 342.7 bar. The cooling system holds 20.1 litres. The oil fill is 21.2 litres. The engine fitted is the HINO J05E-TI. The Kobelco Hydraulic Excavator series covers 52 models. Rated output within it ranges from 62.6 to 380.3 kW; the SK260LC-9 sits in the lower part of that range with 137.1 kW. Its immediate neighbours are the SK260LC-10 below it with 133 kW and the SK290 LC above it with 141.7 kW. Unladen weight within it ranges from 13,800 to 97,400 kg; here the SK260LC-9 sits in the middle of that range with 56,230 kg. 100 Kobelco models across 7 series are on record.

Kobelco SK Excavators: What the Letters SR, LC and NLC Mean, the Generation Number, and Track Tension as a Used-Buy Check Point

Kobelco marks its crawler excavators with the SK prefix. The "Kobelco Hydraulic Excavator" bucket holds 52 models, from compact machines up to the 850 class (SK850LC), spanning 62 to 380 kW.

Read on 5 more paragraphs

LC denotes a wider, elongated undercarriage (more ground contact on soft terrain), while NLC ("Narrow Long Crawler") is the narrower counterpart for tight jobsites — both appear on models such as the SK350LC or SK480LC. SR ("Short Radius") is Kobelco's own design for minimal rear overhang: on SR models like the "115SR" or "135SR LC", the tail extends only about 185 mm past the tracks, which suits confined urban sites.

A separate ED line, such as the ED150 or ED190, combines an excavator with a 6-way dozer blade in one machine.

The digit after the hyphen (e.g. SK200-8) marks the generation — Kobelco has now reached generation 10 and 11, each bringing revised engine and emissions technology. When buying used, the generation number is worth checking: parts and control software aren't always compatible across generations.

On the track undercarriage itself, a used-buy check should also cover track tension: tracks that are too loose come off the rollers more easily on rough ground and speed up wear on the track links and rollers, while tracks pulled too tight increase load on the drive sprocket and idler wheel.

Cylinder count (3 to 6) and displacement (952 to 15,241 cm³) further indicate the size class.

Sources: SpecCodex register, model data: Kobelco Hydraulic Excavator

Technical data

Engine

Engine modelHINO J05E-TIcorrect
Power137.1 kWcorrect
Rated speed2,100 rpmcorrect
Torque654 Nmcorrect
Cylinders4correct
Displacement5,124.2 cm³correct
Coolant capacity20.1 lcorrect
Engine oil capacity21.2 lcorrect

Dimensions and weights

Length10,302.2 mmcorrect
Width3,383.3 mmcorrect
Unladen weight56,230 kgcorrect

Working data

Hydraulic oil capacity280.1 lcorrect
Hydraulic pressure342.7 barcorrect
Fuel tank capacity460.3 lcorrect

Other data

Cab height3,109 mmcorrect

Where this model stands

Power-to-weight ratio: 2.4 kW/t (137 kW / 56.2 t)

Stronger than 68% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kobelco SK260LC-9 have?

The Kobelco SK260LC-9 delivers 137 kW.

How much does the Kobelco SK260LC-9 weigh?

The unladen weight is 56,230 kg.

What engine does the Kobelco SK260LC-9 have?

4 cylinders, 5,124 cm³ displacement.

What are the dimensions of the Kobelco SK260LC-9?

10,302 mm × 3,383 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare