Kivisampo S4000
Built: 2004 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kivisampo – other models: Finnish chassis for mobile crushing and screening plants, the Seula screens and Hihnakuljetin conveyor belts, unladen weights from 6,500 to 51,500 kg, gross weights up to 82,500 kg
This page gathers the Finnish chassis and trailers for mobile crushing and screening plants of the brand Kivisampo the register could not assign to a named range. The model names show the origin of the equipment mounted on them: Seula is the Finnish word for a screening plant, Hihnakuljetin for a conveyor belt, and alongside them stand the equipment names Barmack 9100, Metso 550, C150, C125B and Seula Terex 6202 for crushing and screening machines of well-known makers on the Kivisampo chassis; the brand name itself combines the Finnish words for stone and the mythical mill Sampo.
Read on 3 more paragraphs
The register lists here 15 versions with unladen weights from 6,500 to 51,500 kg, gross weights from 6,500 to 82,500 kg, lengths from 12,000 to 24,400 mm and widths from 3,480 to 4,000 mm.
With weights of over 80 tonnes and widths up to 4 metres, these are not road-traffic-type trailers but chassis for relocatable crushing, screening and conveying plant, as used in quarrying and open-cast mining as well as in the recycling of construction rubble. Moving such plant between sites is usually done as an abnormal-load transport under its own permit.
On a used unit, the chassis and axles for wear and corrosion, the condition of the crushing unit or screen box, the conveyor belts and their rollers, the hydraulics of the set-up and travel gear, and the drive and wiring of the mounted plant all count; on screening plants the condition of the screen decks and vibrating drives is also worth checking.
Sources: SpecCodex register, model data: Kivisampo (weitere Modelle), Zulassungsdaten Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 18,800 mmcorrect |
|---|---|
| Width | 3,500 mmcorrect |
| Unladen weight | 24,000 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Frequently asked questions
How much does the Kivisampo S4000 weigh?
The unladen weight is 24,000 kg.
What is the gross vehicle weight of the Kivisampo S4000?
42,000 kg.
What are the dimensions of the Kivisampo S4000?
18,800 mm × 3,500 mm.
When was the Kivisampo S4000 built?
Production years: 2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
