Kioti DK55 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Kioti DK55 belongs to the Kioti 4WD Tractor series. Under the bonnet works a four-cylinder engine displacing 2.2 litres, producing 55 hp (40.3 kW). Rated power is reached at 2,600 rpm.
At 28 km/h, that is as fast as it goes. Empty, it weighs 2,350 kg.
Within the range, rated power spans from 22.3 to 91.2 hp; with 54.7 hp, the DK55 sits in the upper third. Directly alongside are the DK45SE HST with 45.6 hp below and the DK65S with 64.9 hp above.
Technical data
Engine
| Engine model | 4A220Tcorrect |
|---|---|
| Power | 54.7 hp (40.3 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,197.5 cm³correct |
Dimensions and weights
| Ground clearance | 445correct |
|---|---|
| Unladen weight | 2,350 kgcorrect |
Drivetrain and chassis
| Gearbox type | synchro shuttlecorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
| Tyre size | front 9.5-20 rear 14.9-28correct |
| Top speed | 27.8 km/hcorrect |
Working data
| Pump flow | 37.5 l/mincorrect |
|---|---|
| Fuel tank capacity | 68.1 lcorrect |
Other data
| Height | 2,459.7correct |
|---|
Where this model stands
Power-to-weight ratio: 17.1 kW/t (40 kW / 2.4 t)
Power class: Universal (40–100 hp)
Stronger than 39% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kioti DK55 have?
The Kioti DK55 delivers 54.7 hp.
How much does the Kioti DK55 weigh?
The unladen weight is 2,350 kg.
What engine does the Kioti DK55 have?
4 cylinders, 2,198 cm³ displacement.
How fast does the Kioti DK55 go?
Top speed is 27.8 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.