StartTractorsKioti › CK27 HST

Kioti CK27 HST 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kioti CK27 HST is a tractor from the Kioti 4WD Tractor series. Power comes from a three-cylinder engine; from 1.4 litres it draws 28 hp (20.9 kW). Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 21 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 1,414 kg.

Within the range, rated power spans from 22.3 to 91.2 hp; with 28.4 hp, the CK27 HST sits in the lower third. Directly alongside are the CK25 HST with 25.3 hp below and the CK30 with 30.4 hp above.

Technical data

Engine

Engine model3A139LWHcorrect
Power28.4 hp (20.9 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,392.9 cm³correct

Dimensions and weights

Ground clearance351correct
Unladen weight1,414 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears3correct
Tyre sizefront 7-14 rear 11.2-24correct
Top speed21.2 km/hcorrect

Working data

Pump flow48.5 l/mincorrect
Fuel tank capacity30.3 lcorrect

Other data

Height2,462.8correct

Where this model stands

Power-to-weight ratio: 14.8 kW/t (21 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 16% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kioti CK27 HST have?

The Kioti CK27 HST delivers 28.4 hp.

How much does the Kioti CK27 HST weigh?

The unladen weight is 1,414 kg.

What engine does the Kioti CK27 HST have?

3 cylinders, 1,393 cm³ displacement.

How fast does the Kioti CK27 HST go?

Top speed is 21.2 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare