StartTractorsKioti › CK25

Kioti CK25 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Kioti CK25 belongs to the Kioti 4WD Tractor series. 25 hp (18.6 kW) is what the three-cylinder engine gets out of 1.3 litres. Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 23 km/h — a working pace, not a travelling one. At 1,431 kg, it puts weight behind its pulling power — a good 57 kilograms per hp.

Within the range, rated power spans from 22.3 to 91.2 hp; with 25.3 hp, the CK25 sits at the bottom end. Directly alongside are the CK20S HST with 22.3 hp below and the CK27 with 28.4 hp above.

Technical data

Engine

Engine modelTD1300LXAcorrect
Power25.3 hp (18.6 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,299.5 cm³correct

Dimensions and weights

Ground clearance351correct
Unladen weight1,431 kgcorrect

Drivetrain and chassis

Gearbox typesynchro shuttlecorrect
Forward gears8correct
Reverse gears8correct
Tyre sizefront 7-14 rear 11.2-24correct
Top speed23 km/hcorrect

Working data

Pump flow49.2 l/mincorrect
Fuel tank capacity30.3 lcorrect

Other data

Height2,462.8correct

Where this model stands

Power-to-weight ratio: 13 kW/t (19 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 13% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kioti CK25 have?

The Kioti CK25 delivers 25.3 hp.

How much does the Kioti CK25 weigh?

The unladen weight is 1,431 kg.

What engine does the Kioti CK25 have?

3 cylinders, 1,300 cm³ displacement.

How fast does the Kioti CK25 go?

Top speed is 23 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare