Jungheinrich TGF 320
Series: Jungheinrich Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jungheinrich DFG/TFG – diesel and LPG trucks on a shared platform, with mast rollers and chain elongation as key wear points
Jungheinrich clearly separates its IC-engine trucks by fuel: "DFG" marks the diesel trucks, "TFG" the otherwise identical LPG variants — both lines largely share chassis and mast and differ mainly in the power unit, often rugged Kubota industrial engines.
Read on 4 more paragraphs
The digits after the code in practice indicate the capacity class, with the last two digits usually marking capacity in hundreds of kilograms and the leading digit the series generation — visible on models such as DFG 316, DFG 425 and DFG 670, and their TFG counterparts from TFG 660 to TFG S80.
Models recorded here span own weights of 3,000 to 13,600 kg, capacities of 1,600 to 9,000 kg, and lift heights of 3,000 to 6,570 mm, with engines of 1,999 to 5,737 cm³ displacement — the bucket covers light through heavy diesel/LPG trucks.
On the mast and lift chain, a used-buy check should also cover the mast rollers' condition and chain elongation: a stretched lift chain comes off its sprockets more easily and, once it exceeds the manufacturer's limit, should be replaced outright rather than simply re-tensioned.
For a used truck, beyond mast condition, check the Kubota engine's condition (oil consumption, cooling system) and, on LPG models, the tightness of the tank-exchange system and vaporiser. Cross-checking operating hours against the maintenance book is worthwhile given how long-lived Jungheinrich chassis tend to be.
Sources: SpecCodex register, model data: Jungheinrich Forklift
Technical data
Engine
| Engine model | diesel enginecorrect |
|---|
Dimensions and weights
| Width | 1,070 mmcorrect |
|---|---|
| Ground clearance | 135.1 mmcorrect |
| Unladen weight | 3,250 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|---|
| Top speed | 19.2 km/hcorrect |
| Turning radius | 2,020 mmcorrect |
Working data
| Lifting capacity | 2,000 kgcorrect |
|---|---|
| Lift height | 3,300 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Mast tilt back | 6°correct |
| Mast tilt forward | 7°correct |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Jungheinrich TGF 320 weigh?
The unladen weight is 3,250 kg.
How fast does the Jungheinrich TGF 320 go?
Top speed is 19.2 km/h.
What is the load capacity of the Jungheinrich TGF 320?
Load capacity is 2,000 kg, lift height 3,300 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DFG 316
DFG 316s
DFG 320
DFG 320s
DFG 420s
DFG 425
DFG 425s
DFG 430
DFG 430s
DFG 435
DFG 540s
DFG 545
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.