John Deere 5310 (A)
Built: 1997–2000 · Series: 5010er-Baureihe
More machines from model year 1997
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
John Deere 5010er-Baureihe – the next generation of Augusta-built utility tractors: types 5210 to 5510, three- and four-cylinder diesels of 2,934 to 4,517 cm³, 39 to 65.5 kW
With the 5010 series, John Deere introduced the successor generation to the 5000-series utility tractors at its Augusta plant in Georgia; the types 5210, 5310, 5410 and 5510 recorded in the register carry, like their predecessors, the A suffix denoting the Augusta production site. Compared with the previous series, engine power, displacement and weight of the 5010-series types increased noticeably.
Read on 3 more paragraphs
The register lists 4 versions with 39 to 65.5 kW from three- and four-cylinder diesel engines of 2,934 to 4,517 cm³ displacement, torque from 177 to 320 Nm and a rated speed of 2,400 rpm throughout; unladen weight ranges from 2,110 to 3,048 kg, lengths from 3,198 to 3,540 mm, widths from 1,745 to 1,850 mm, heights from 2,464 to 2,540 mm.
The 5010 series covers the upper end of the utility-tractor segment relative to the 5000 series, and is aimed at operations with more demanding field, feeding and transport tasks that need more power and pulling force than the smaller utility types offer, competing with comparable ranges from Case IH, New Holland and Massey Ferguson.
On a used 5010-series tractor, the condition of the hydraulics and lift linkage, the tightness of the gearbox and axles, the diesel engine's mileage, and rust on the mudguards and bonnet all count; parts are well available through John Deere's dense dealer network.
Sources: SpecCodex register, model data: John Deere 5010er-Baureihe, John Deere (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 64 hp (47.1 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Torque | 228 Nmcorrect |
| Speed at max. torque | 1,798 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,934 cm³correct |
| Bore | 106.4 mmcorrect |
| Stroke | 110 mmcorrect |
| Compression ratio | 17.4correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,535 mmcorrect |
|---|---|
| Width | 1,850 mmcorrect |
| Height | 2,464 mmcorrect |
| Wheelbase | 2,050 mmcorrect |
| Ground clearance | 435 mmcorrect |
| Unladen weight | 2,110 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 9V/3R or 12V/12Rcorrect |
| Front tyres | 6.5-20 ASF (A: 9.5-24 AS)correct |
| Rear tyres | 16.9-28 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | frame constructioncorrect |
|---|
Where this model stands
Power-to-weight ratio: 22.3 kW/t (47 kW / 2.1 t)
Power class: Universal (40–100 hp)
Stronger than 44% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere 5310 (A) have?
The John Deere 5310 (A) delivers 64 hp.
How much does the John Deere 5310 (A) weigh?
The unladen weight is 2,110 kg.
What engine does the John Deere 5310 (A) have?
3 cylinders, 2,934 cm³ displacement, Diesel.
How fast does the John Deere 5310 (A) go?
Top speed is 30 km/h.
What are the dimensions of the John Deere 5310 (A)?
3,535 mm × 1,850 mm × 2,464 mm.
When was the John Deere 5310 (A) built?
Production years: 1997–2000.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.