John Deere 444J Powerllel Pin-on
Series: John Deere Wheel Loader
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
John Deere wheel loaders — what the number and end letter say about class
At John Deere, the number in the model name places the wheel loader in a size class: 200-series models like the 244 count as compact loaders, while 400- and 500-series models like the 444 or 544 are mid-size loaders with correspondingly more engine power and bucket capacity.
Read on 4 more paragraphs
The letter at the end long indicated the generation (such as J or H); John Deere has since added a performance-tier marker for its midsize loaders as well: G denotes the base or economy version, while P and X mark higher equipment and performance tiers.
The “John Deere Wheel Loader” collective entry therefore mixes different generations and performance tiers side by side, from small compact loaders like the 204L up to large jobsite loaders. Engine power ranges from around 38 kW at the lower end up into three-digit kW figures for the largest models.
When buying used, check the quick coupler, lift linkage and axles, and run the tilt-bucket hydraulics through their motions, since loaders see very different wear depending on quarry or yard duty.
In short: the number signals the size class, the end letter the generation or performance tier — models like the 204L, 244J or 444 show how wide a range sits under one register entry.
Sources: SpecCodex register, model data: John Deere Wheel Loader, John Deere Namensstrategie G/P/X, Equipment World, John Deere 444, Haendlerseite (Groessenklasse)
Technical data
Engine
| Engine model | 4045Hcorrect |
|---|---|
| Power | 88.7 kWcorrect |
| Rated speed | 2,200 rpmcorrect |
| Torque | 515.2 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,522.8 cm³correct |
| Aspiration | Turbochanged changed air coolercorrect |
| Coolant capacity | 19.3 lcorrect |
Dimensions and weights
| Wheelbase | 2,743.2 mmcorrect |
|---|---|
| Ground clearance | 396.2 mmcorrect |
| Unladen weight | 10,852.7 kgcorrect |
Drivetrain and chassis
| Gearbox type | Countershaft type powershift transmissioncorrect |
|---|---|
| Forward gears | 4correct |
| Reverse gears | 3correct |
| Tyre size | 17.5 R25correct |
| Turning radius | 4,720 mmcorrect |
Working data
| Pump flow | 140.1 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 98.4 lcorrect |
| Fuel tank capacity | 246.1 lcorrect |
Other data
| Cab height | 3,176 mmcorrect |
|---|---|
| System voltage | 24 Vcorrect |
More machines with this engine (4045H, 10)
Where this model stands
Power-to-weight ratio: 8.2 kW/t (89 kW / 10.9 t)
Stronger than 44% of the wheel loaders in the register — out of 1,251 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere 444J Powerllel Pin-on have?
The John Deere 444J Powerllel Pin-on delivers 88.7 kW.
How much does the John Deere 444J Powerllel Pin-on weigh?
The unladen weight is 10,853 kg.
What engine does the John Deere 444J Powerllel Pin-on have?
4 cylinders, 4,523 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Wheel loader in 3D section
Turn the model, look inside and click an assembly — each one is explained.