Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 3020

John Deere 3020

Built: 1964–1972 · Series: 20er-Baureihe

More machines from model year 1964

Wikimedia Commons · CC BY 3.0 · Milkweed110 · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 20er series from John Deere includes the 3020. Production: 1964–1972. The engine delivers 75 hp (55.2 kW), has 4 cylinders, with a displacement of 4,425 cm³. Rated speed is 2,410 rpm. The machine is 3,518 mm long, 2,276 mm wide and 1,969 mm high. The unladen weight is 3,426 kg. The wheelbase measures 2,286 mm. Ground clearance is 395 mm. Top speed is 20 km/h. The tank holds 109.8 litres. Transmission: 8V/2R. The engine is water-cooled. Tyres: front 6.50-16 ASF, rear 11-38 AS. The fuel is diesel. The gearbox offers 8 forward gears. There are also 2 reverse gears. The linkage is category II. Around 195 units were built. The 20er-Baureihe series covers 19 models. Rated output within it ranges from 25.2 to 100 hp; the 3020 sits in the upper part of that range with 75 hp. Its immediate neighbours are the 820 Diesel below it with 69 hp and the 3120 (A) above it with 81 hp. Unladen weight within it ranges from 1,247 to 3,830 kg; here the 3020 sits in the upper part of that range with 3,426 kg. 2622 John Deere models across 140 series are on record.

John Deere 20 series – two worlds under one name: the two-cylinder 320 to 820 (1956–1958) and the New Generation 1020 to 4020 (1963–1972)

At John Deere the '20 series' label covers two entirely different tractor generations that share only their final digits. The first are the two-cylinder models 320, 420, 520, 620, 720 and 820 of 1956 to 1958 – the last 'Johnny Poppers' with the horizontal twin whose exhaust beat gave them the nickname, built in Waterloo and Dubuque, Iowa, as petrol, all-fuel, LPG and, on the 720/820, diesel tractors. In 1960 John Deere switched to four- and six-cylinders with the 'New Generation of Power'; the second group of 20s, the 1020, 2020, 3020 and 4020 of 1963 to 1972, is that new world, and with about 184,000 units built the 4020 became the best-selling tractor of its time and the benchmark of the 100 hp class.

Read on 3 more paragraphs

For Europe the Mannheim plant built the 1020, 2020 and 3020 as well as the intermediate 1120, 2120 and 3120; in the register OU marks the orchard utility version, VU the vineyard utility and (A) four-wheel drive. Values run from 18.5 to 73.6 kW (25 to 95 hp), 1,647 to 7,726 cm³ with two to six cylinders, unladen weights from 1,247 to 3,830 kg, lengths from 2,915 to 4,062 mm and widths from 980 to 2,276 mm.

The break of 1960 was the biggest in John Deere's history: the two-cylinders were considered outdated, and the new generation brought the Syncro-Range transmission, closed-centre hydraulics and, on the 4020 from 1969, the Power Shift option.

Used, the two-cylinders are collector pieces, while many New Generation models are still at work. When buying, transmission and hydraulics matter on the Waterloo 20s, engine and front axle on the Mannheim models; parts are readily available through John Deere and specialists.

Sources: SpecCodex register, model data: John Deere 20er-Baureihe, John Deere (manufacturer), John Deere 4020 (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power75 hp (55.2 kW)correct
Rated speed2,410 rpmcorrect
Cylinders4correct
Displacement4,425 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,518 mmcorrect
Length138.5 in (3517.9 mm)correct
Width2,276 mmcorrect
Width89.625 in (2276.5 mm)correct
Height1,969 mmcorrect
Height66.5 in (1689.1 mm)correct
Wheelbase2,286 mmcorrect
Ground clearance395 mmcorrect
Unladen weight3,426 kg (7,695-7,945 lbs. (operating weight)9,585 lbs. (ballasted weight))correct

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox8V/2Rcorrect
Forward gears8correct
Reverse gears2correct
Front tyres6.50-16 ASFcorrect
Rear tyres11-38 AScorrect
Top speed20 km/hcorrect

Working data

Fuel tank capacity109.8 l (29 gal)correct

Origin and approval

ConstructionBlockbauweise mit Geräte-Halbrahmencorrect
Units built195correct

Other data

Linkage categoryCat IIcorrect

Where this model stands

Power-to-weight ratio: 16.1 kW/t (55 kW / 3.4 t)

Power class: Universal (40–100 hp)

Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 3020 have?

The John Deere 3020 delivers 75 hp.

How much does the John Deere 3020 weigh?

The unladen weight is 3,426 kg.

What engine does the John Deere 3020 have?

4 cylinders, 4,425 cm³ displacement, Diesel.

How fast does the John Deere 3020 go?

Top speed is 20 km/h.

What are the dimensions of the John Deere 3020?

3,518 mm × 2,276 mm × 1,969 mm.

When was the John Deere 3020 built?

Production years: 1964–1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 32 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare