Technical register for agricultural, construction and commercial machinery · sourced data
Start › Aerial work platforms › JLG › M400AJP

JLG M400AJP

Series: JLG Boom Lift

The photo shows the 400S from the same series. Source: https://www.lectura-specs.com/en/model/aerial-work-platform/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the M400AJP, JLG offers a model from the JLG Boom Lift series. The engine delivers 6.9 hp (5.1 kW). The engine comes from Kubota. The machine is 2,040 mm high. The unladen weight is 6,350.3 kg. The wheelbase measures 2,042.2 mm. Ground clearance is 228.6 mm. The fuel is diesel. The hydraulic tank holds 15.1 litres. Tyre size: 240/55-17,5 Pnuematic. The JLG Boom Lift series covers 64 models. Rated output within it ranges from 6.8 to 88.4 hp; the M400AJP sits at the bottom of that range with 6.9 hp. Its immediate neighbours are the M450AJ below it with 6.8 hp and the 450A 2WD above it with 47.7 hp. Unladen weight within it ranges from 5,681 to 26,354 kg; here the M400AJP sits at the bottom of that range with 6,350.3 kg. 180 JLG models across 10 series are on record.

JLG Boom Lift 400S to 740AJ (telescopic and articulating aerial work platforms) – S, SJ and AJ as boom type, a leading E for electric drive: engine output 5 to 65 kW, operating weight 3.5 to 26.4 t

On JLG models like the 400S, 460SJ or 740AJ, the number roughly tracks platform height in feet, while the letter code describes the boom type: "S" marks a straight telescopic boom, "SJ" a telescopic boom with an added basket jib, and "AJ" an articulating boom with a jib. JLG itself describes telescopic booms as reach specialists for distance and open ground, while articulating booms trade some reach for a more compact footprint around obstacles. As with other manufacturers, the quoted working height sits above bare platform height, since it factors in the reach of a standing operator on the platform; actual platform height is correspondingly lower than the model number suggests.

Read on 4 more paragraphs

Models with a leading "E", such as the E26MJ, E33MJ or E600J, mark electric-drive lifts — as opposed to diesel- or gas-powered models like the 400S or 460SJ.

Platform capacity holds steady at 230 kg across the recorded SpecCodex data, matching comparable lifts from other manufacturers. Several models also share a recorded displacement of 2,900 cm³, pointing to one common engine fitted across multiple boom sizes.

When buying used, check for play in the telescoping boom's slide pads, inspect hydraulic hoses running through the boom, test the emergency-lowering system, and — on electric models — check battery condition. Hours on the clock and the service log deserve a look too.

In short: the number is a rough platform height, S/SJ/AJ describes the boom type, and a leading E marks electric drive.

Sources: SpecCodex register, model data: JLG Boom Lift, — JLG: Straight vs. Articulating Boom Lift, — JLG: 800S Telescopic Boom Lift Produktseite

Technical data

Engine

Engine makeKubotacorrect
Fueldieselcorrect
Power6.9 hp (5.1 kW)correct

Dimensions and weights

Length6,705.6 mmcorrect
Width1,798.3 mmcorrect
Height2,040 mmcorrect
Wheelbase2,042.2 mmcorrect
Ground clearance228.6 mmcorrect
Unladen weight6,350.3 kgcorrect

Drivetrain and chassis

Tyre size240/55-17.5 Pnuematiccorrect

Working data

Hydraulic oil capacity15.1 lcorrect

Where this model stands

Power-to-weight ratio: 0.8 kW/t (5 kW / 6.4 t)

Stronger than 5% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JLG M400AJP have?

The JLG M400AJP delivers 6.9 hp.

How much does the JLG M400AJP weigh?

The unladen weight is 6,350 kg.

What are the dimensions of the JLG M400AJP?

6,706 mm × 1,798 mm × 2,040 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare