Technical register for agricultural, construction and commercial machinery · sourced data
Start › Aerial work platforms › JLG › 150HAX

JLG 150HAX

Series: JLG Boom Lift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JLG 150HAX belongs to the JLG Boom Lift series. The engine delivers 77.6 hp (57 kW). The unladen weight is 26,354 kg. The wheelbase measures 5,492.5 mm. Ground clearance is 280.2 mm. Top speed is 4.8 km/h. The tank holds 257.8 litres. The fuel is diesel. The hydraulic tank holds 469.4 litres. The engine fitted is the 4B3,9C. Tyre size: 445/65R22,5. The JLG Boom Lift series covers 64 models. Rated output within it ranges from 6.8 to 88.4 hp; the 150HAX sits at the top of that range with 77.6 hp. Its immediate neighbours are the 800AJ 4WD below it with 65.3 hp and the 1250AJP above it with 88.4 hp. Rated output within it ranges from 5 to 65 kW; here the 150HAX sits at the top of that range with 57 kW. 180 JLG models across 10 series are on record.

JLG Boom Lifts: What S, SJ and AJ Mean After the Number

On JLG models like the 400S, 460SJ or 740AJ, the number roughly tracks platform height in feet, while the letter code describes the boom type: "S" marks a straight telescopic boom, "SJ" a telescopic boom with an added basket jib, and "AJ" an articulating boom with a jib. JLG itself describes telescopic booms as reach specialists for distance and open ground, while articulating booms trade some reach for a more compact footprint around obstacles.

Read on 4 more paragraphs

Models with a leading "E", such as the E26MJ, E33MJ or E600J in this dataset, mark electric-drive lifts — as opposed to diesel- or gas-powered models like the 400S or 460SJ.

Platform capacity holds steady at 230 kg across the recorded SpecCodex data, matching comparable lifts from other manufacturers. Several models also share a recorded displacement of 2,900 cm³, pointing to one common engine fitted across multiple boom sizes.

When buying used, check for play in the telescoping boom's slide pads, inspect hydraulic hoses running through the boom, test the emergency-lowering system, and — on electric models — check battery condition. Hours on the clock and the service log deserve a look too.

In short: the number is a rough platform height, S/SJ/AJ describes the boom type, and a leading E marks electric drive.

Sources: Kennwerte der Modelle JLG Boom Lift, — JLG: Straight vs. Articulating Boom Lift, — JLG: 800S Telescopic Boom Lift Produktseite

Technical data

Engine

Engine model4B3.9Ccorrect
Fueldieselcorrect
Power77.6 hp (57 kW)correct

Dimensions and weights

Width3,511.3correct
Wheelbase5,492.5correct
Ground clearance280.2correct
Unladen weight26,354 kgcorrect

Drivetrain and chassis

Tyre size445/65R22.5correct
Top speed4.8 km/hcorrect
Turning radius8,230 mmcorrect

Working data

Hydraulic oil capacity469.4 lcorrect
Fuel tank capacity257.8 lcorrect

More machines with this engine (4B3.9C, 4)

Where this model stands

Power-to-weight ratio: 2.2 kW/t (57 kW / 26.4 t)

Stronger than 92% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JLG 150HAX have?

The JLG 150HAX delivers 77.6 hp.

How much does the JLG 150HAX weigh?

The unladen weight is 26,354 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare